7
For ScanSnap iX500 Users
■ Notes on Using in a Wireless LAN Environment
Use the ScanSnap in a secured wireless LAN environment on the user's responsibility. If
the ScanSnap is used in an unsecured environment, there is a possibility that important
data such as personal information may be leaked to a third party. PFU Limited assumes no
liability whatsoever for damages or information leakage arising in a wireless LAN
environment, such as if the ScanSnap is used in an unsecured environment, or if the
security is broken in a special way.
Disclaimer of Liability
■ Reproducibility of the Scanned Image Data
Confirm that the image data scanned with this product meets your requirements (for
example, image reproducibility in size accuracy, fidelity, content, colors).
Make sure that there are no missing parts in the scanned image data before disposing of
the original document used for scanning.
Note that when there are sections marked with a highlight pen, the color of the marked
section may not be accurately reproduced depending on the color and density, or may
result in a different color tone from the original.
For ScanSnap S1300i Users
■ USB Port Use Restriction
When connecting the USB bus power cable or USB cable of the ScanSnap to the USB port:
The ScanSnap does not work properly if you connect it to the USB port on a non-
powered USB hub.
The ScanSnap does not work properly if you connect it to the USB port of a PC card.
The ScanSnap may not work properly if you connect the USB bus power cable and USB
cable to the USB ports of different computers or powered USB hubs.
The ScanSnap may not work properly if you connect another USB-powered device to
any of the USB ports of the computer.
Depending on the USB power supply capability of the computer, other USB-powered
devices connected to the computer may be affected.
For ScanSnap iX500 Users
■ Transmission Speed When Using in a Wireless LAN Environment
The transmission speed represents the speed defined in the standard, and does not
represent the actual speed. The actual transmission speed varies depending on the
environment in which you use the ScanSnap. In the following environments, data
transmission may slow down or not be possible at all:
The ScanSnap is used near another device (e.g., a microwave oven) that causes
interference.
There is a large distance, obstruction, or interference between the ScanSnap and a
wireless access point/router.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
