Fujitsu ScanSnap S1300i Getting Started Guide

5
Connecting the ScanSnap
1.
Select the power cable type according to
power source for the ScanSnap.
z To use the ScanSnap at a fixed location
Use the power cable to connect to an AC outlet.
For details about the connection, refer to "Using
the Power Cable" (page 5) in Step 3.
z To use the ScanSnap in a remote location with
your laptop computer or a place without AC
outlets available nearby
Use the USB bus power cable for power supply
from your computer.
For details about the connection, refer to "Using the
USB Bus Power Cable" (page 5) in Step 3.
2. Remove the tape seal covering the USB
connector and power connector of the
ScanSnap.
3. Connect cables to the ScanSnap.
z Using the Power Cable
1. Connect the power cable to the power
connector of the ScanSnap and plug in the
AC outlet.
2. Connect the USB cable to the USB
connector on the ScanSnap and the USB
port on your computer.
z Using the USB Bus Power Cable
1. Connect the USB bus power cable to the
power connector on the ScanSnap and the
USB port on your computer.
2. Connect the USB cable to the USB
connector on the ScanSnap and the USB
port on your computer.
ATTENTION
zOnly one ScanSnap can be used by a computer at
a time.
zUse only the cable supplied with the ScanSnap.
CAUTION
Do not use AC adapters other than the one supplied
with this ScanSnap. Doing so may cause damage to
the ScanSnap.
Manufacturer: LEI
Model No.: NU13-1072166-I3
AC Cable
AC
Adapter
USB Bus
Power Cable
ATTENTION
zTo power on the ScanSnap, the USB cable
and either of the power cables (power cable or
USB bus power cable) need to be connected.
zWhen connecting to USB hub, make sure to
connect the ScanSnap to the USB hub which
is connected to a USB port of your computer.
Use a powered USB hub (with AC adapter).
zIf USB port or USB hub is USB 1.1, scanning
speed will slow down.
zConnect the USB cable with the USB mark
facing up.

Fujitsu ScanSnap S1300i Specifications

General

Film scanning	-
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 863 mm
ADF scan speed (b/w, A4)	- ppm
ADF scan speed (color, A4)	12 ppm
Optical scanning resolution	600 x 600 DPI
Scanner type	ADF scanner
Product color	Black, Silver
Built-in display	No
Scan to	File, Image
Sensor type	Dual CIS
Scan drivers	ScanSnap
Daily duty cycle (max)	- pages
Auto document feeder (ADF) input capacity	10 sheets
Maximum scan area (ADF)	216 x 360 mm
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Envelopes, Photo paper, Plain paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	64 - 104.7 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Professional
Input voltage	100-240 V
Power supply type	AC/USB
AC input frequency	50 - 60 Hz
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Storage temperature (T-T)	20 - 80 °C
Operating temperature (T-T)	5 - 35 °C
Sustainability certificates	ENERGY STAR
Certification	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g