7
Scan Test
For details on documents that can be scanned with
the ScanSnap and how to load documents, refer to
"ScanSnap Overview" in the Operator's Guide.
1. Load a document in the ScanSnap.
1. Pull up the extension.
2. Slide open the side guides of the right and
left.
3. Load the document on the ADF paper chute
(cover), and adjust the side guides to the size
of the document.
2. Press the [Scan] button on the ScanSnap.
D Scanning starts. The Quick Menu appears
when scanning is completed.
ATTENTION
If scanning does not start, refer to
"Troubleshooting" in the ScanSnap Manager
Help.
Set the document
face-down and top-first
To Next Page
Loading...
