Feed Rollers x 2
Clean lightly taking care not to roughen the surface.
For further information please refer to the
ScanSnap S300/S300M Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Eject Rollers x 2
Clean lightly taking care not to roughen the surface.
Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd
Cleaning Instructions for ScanSnap S300/S300M
To rotate the Feed and Eject Rollers, open the ADF and hold down the SCAN button for three seconds
while the power lamp lights is blue. The rotation can be repeated as long as the ADF is open.
As a guideline, seven presses of the POWER button make the rollers rotate one full turn.
Hold down the SCAN button for three seconds
Rollers will rotate
Plastic Rollers
Feed Rollers
White Sheets
Glass
Pick Roller
Pad Assy
Eject Rollers