Why applications cannot be selected in the ScanSnap Manager settings?
If you can't select an application in advance, use Left-Click Menu Mode by unchecking [Use ScanSnap Quick Menu] on the Right-Click Menu.
What to do if my Fujitsu ScanSnap S510 Scanner cannot be turned on?
If your Fujitsu Scanner won't turn on, ensure the Power/USB cable is correctly connected. Try disconnecting and reconnecting the power cable, waiting at least 5 seconds before reconnecting. Also, make sure the paper chute is open. Wait until Windows has fully started, as the LED turns off during startup or sleep mode. Finally, ensure you press the [POWER] button.
What to do if Fujitsu ScanSnap S510 scanning does not start?
If scanning doesn't start on your Fujitsu Scanner, check the following: * Ensure the USB cable is correctly connected and, if using a hub, verify the hub's power supply. * Disconnect and reconnect the power cable, waiting at least 5 seconds before reconnecting. * If the ScanSnap Manager icon isn't visible on the taskbar, start it by going to [Start] -> [All Programs] -> [ScanSnap Manager] -> [ScanSnap Manager]. * If the ScanSnap Manager icon is displayed as an error, perform "Scan for hardware changes" or "Refresh" from Device Manager. If that doesn't work, update the ScanSnap driver. If problems persist, disconnect and reconnect the AC cable and adapter, try connecting the scanner directly to your PC instead of through a USB hub, try a different USB port, and restart your PC. If ...
How to fix a part of the document does not appear in the scanned image with Fujitsu ScanSnap S510?
If a part of the document does not appear in the scanned image with your Fujitsu Scanner, clear the check box for "Allow automatic blank page removal" on [Option] of the [Scanning] tab of [Scan and Save Settings].
Why is paper not fed properly in my Fujitsu ScanSnap S510 Scanner?
If paper is not being fed properly or is stopping midway in your Fujitsu Scanner, it could be due to a dirty Pick roller. Clean the Pick roller following the instructions in '5.3. Cleaning Inside of the scanner'. Alternatively, the Pick roller might be worn out, requiring replacement as described in '6.3. Replacing the Pick Roller'. Check for and remove any debris from the document feeding path. Also, ensure the loaded documents meet the conditions described in section 3.2 of the ‘ScanSnap S510 Operator’s Guide’; if not, try slightly pushing the first sheet or changing the document's insertion direction.
Why Fujitsu ScanSnap S510 image scanned is too light or too dark?
If the scanned image from your Fujitsu Scanner is too light or too dark, adjust the "Brightness" setting under [Scanning] - [Option] in the "ScanSnap Manager - Scan and Save Settings" dialog box. This applies to black and white scanning only.
What to do if the scanned images cannot be read with Fujitsu ScanSnap S510 Scanner?
If the scanned images cannot be read and small letters are squashed, right click the ScanSnap Manager icon on the task bar and select "Best" or "Excellent" in the [Scanning] tab and scan them again.
How to prevent show-through when scanning with my Fujitsu ScanSnap S510?
If images on the back of pages are printed-through and overlaid on the scanned image when scanning a two-sided document with your Fujitsu Scanner, ensure that the 'Setting for text only document.' checkbox is marked in the 'Read mode option' dialog box, accessible via [Option] on the [Scanning] tab of the 'ScanSnap Manager - Scan and Save Settings' dialog box.
Why files created by using the ScanSnap cannot be opened with a specified application?
If files created using the ScanSnap cannot be opened with a specified application, verify the location of the Image saving folder, and then delete corrupted files, if any. After that, retry scanning. This issue may occur if the Image saving folder is located on another computer or a network drive and a network error occurred during saving.
Why do vertical lines appear in the scanned image with Fujitsu ScanSnap S510 Scanner?
To address vertical lines appearing in scanned images, clean the inside of the ADF.
Details important information for safe and correct product operation, including warning symbols.
Instructions to verify all items are present after unpacking the scanner and contact support if missing.
Guides through the installation process of necessary software like ScanSnap Manager, Acrobat, etc.
Provides steps for connecting the scanner to a computer via power and USB cables.
Guides on how to modify various scanning parameters through ScanSnap Manager settings.
Covers various settings and operations within the ScanSnap Manager software.
Step-by-step instructions for safely removing jammed documents from the scanner.
A guide to diagnosing and resolving common scanner issues and symptoms.
Detailed steps for cleaning internal components like ADF glass, rollers, and pad ASSY.
Step-by-step instructions for replacing the Pad ASSY consumable.
Detailed procedure for replacing the pick roller consumable on the scanner.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | - bit |
| Maximum scan size | 216 x 356 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Minimum storage drive space | 512 MB |
| Minimum system requirements | Windows 2000/ XP/ Vista |
| Sustainability certificates | ENERGY STAR |
| Power requirements | AC 100V to 240V, 50 / 60 Hz |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | RoHS |
Weight and Dimensions| Weight | 2700 g |
|---|
To Next Page