Fujitsu ScanSnap S510

4.3 Saving Scanning Settings
ScanSnap S510 Operator's Guide 93
Setting the ScanSnap
4
■ Adding Profiles
Operation
1. Right-click the ScanSnap Manager icon , and make sure that [Use ScanSnap
Quick Menu] is unchecked.
⇒ When you uncheck [Use ScanSanp Quick Menu], the Right-Click Menu above
disappears once.
2. Right-click the ScanSnap Manager icon , and then select [SCAN Button Settings].
HINT
When [Use ScanSnap Quick Menu] is marked, the [SCAN] button enters Quick
Menu Mode. You cannot add or edit profiles in the Quick Menu Mode.
S
S
S
S