Fujitsu ScanSnap S510

4.3 Saving Scanning Settings
ScanSnap S510 Operator's Guide 97
Setting the ScanSnap
4
■ Changing Settings for Profiles
Operation
1. Right-click the ScanSnap icon , and then select [SCAN Button Settings].
2. From the "Select a profile" drop-down list in the "ScanSnap Manager - Scan and Save
Settings" dialog box, select a profile you want to change settings for.
3. Change settings for the selected profile.
For detailed information on how to configure scanning settings for profiles, refer to "4.2
Changing Scanning Settings" (page 67).
S
S