To Next Page
J
Jose RomanAug 27, 2025
Why do vertical lines appear in the scanned image with Fujitsu ScanSnap S510 Scanner?
- Jjohn43Aug 28, 2025
To address vertical lines appearing in scanned images, clean the inside of the ADF.
Why do vertical lines appear in the scanned image with Fujitsu ScanSnap S510 Scanner?
To address vertical lines appearing in scanned images, clean the inside of the ADF.
Why is paper not fed properly in my Fujitsu ScanSnap S510 Scanner?
If paper is not being fed properly or is stopping midway in your Fujitsu Scanner, it could be due to a dirty Pick roller. Clean the Pick roller following the instructions in '5.3. Cleaning Inside of the scanner'. Alternatively, the Pick roller might be worn out, requiring replacement as described in '6.3. Replacing the Pick Roller'. Check for and remove any debris from the document feeding path. Also, ensure the loaded documents meet the conditions described in section 3.2 of the ‘ScanSnap S510 Operator’s Guide’; if not, try slightly pushing the first sheet or changing the document's insertion direction.
What to do if Fujitsu ScanSnap S510 Scanner is not recognized even if ScanSnap Manager is installed?
If the Fujitsu Scanner is not recognized even with ScanSnap Manager installed, go to the [Start] menu, select [Control panel] > [System] > [Hardware] > [Device Manager]. Delete the device name (such as USB device) under "Other Device" in [Device Manager] and restart your PC.
Why are lines on the document blurred with Fujitsu ScanSnap S510?
If lines on the document are blurred, and you're scanning text, select the checkbox for [Setting for text only document] at [Scanning] – [Option] in the "Scan and Save Settings" window. If the issue persists, change the "Image quality" setting.
How to show the ScanSnap Quick Menu on my Fujitsu ScanSnap S510?
If the ScanSnap Quick Menu is hidden on your Fujitsu Scanner, it could be because the ScanSnap is in Left-Click Menu Mode. To resolve this, mark [Use Quick Menu] on the Right-Click Menu. Also, if ScanSnap Organizer or CardMinder is running and one of them is active, the ScanSnap interacts with the active application, and scanned images are opened with it. To display the ScanSnap Quick Menu, exit these applications or deselect them.
Why are my Fujitsu ScanSnap S510 images not showing up?
If scanned images from your Fujitsu Scanner are not displayed on the screen, and 'Allow automatic blank page removal' is enabled, it's possible that nearly blank documents with few characters are being mistakenly recognized as blank pages and removed. To resolve this, right-click the 'ScanSnap Manager' icon on the task bar, select [SCAN Button Settings] -> [Scanning] tab, click the [Option] button, and then clear the 'Allow automatic blank page removal' checkbox.
Why business cards cannot be scanned when the ScanSnap Quick Menu is used?
If business cards cannot be scanned when using the ScanSnap Quick Menu, start CardMinder, and then press the [SCAN] button with CardMinder being active. Scanned business card images are displayed in CardMinder.
Why Fujitsu ScanSnap S510 shows message "Document size incorrect"?
If you receive a "Document size incorrect" message when scanning with the Carrier Sheet on your Fujitsu Scanner, put only one small-size material (a photo/ a post card) in the Carrier Sheet per scanning.
What to do if the scanned images cannot be read with Fujitsu ScanSnap S510 Scanner?
If the scanned images cannot be read and small letters are squashed, right click the ScanSnap Manager icon on the task bar and select "Best" or "Excellent" in the [Scanning] tab and scan them again.
Why a profile cannot be created with currently configured settings on Fujitsu Scanner?
To create a profile with your desired settings, uncheck [Use ScanSnap Quick Menu] and switch to Left-Click Menu Mode.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | - bit |
| Maximum scan size | 216 x 356 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Minimum storage drive space | 512 MB |
| Minimum system requirements | Windows 2000/ XP/ Vista |
| Sustainability certificates | ENERGY STAR |
| Power requirements | AC 100V to 240V, 50 / 60 Hz |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | RoHS |
Weight and Dimensions| Weight | 2700 g |
|---|
Details important information for safe and correct product operation, including warning symbols.
Instructions to verify all items are present after unpacking the scanner and contact support if missing.
Guides through the installation process of necessary software like ScanSnap Manager, Acrobat, etc.
Provides steps for connecting the scanner to a computer via power and USB cables.
Guides on how to modify various scanning parameters through ScanSnap Manager settings.
Covers various settings and operations within the ScanSnap Manager software.
Step-by-step instructions for safely removing jammed documents from the scanner.
A guide to diagnosing and resolving common scanner issues and symptoms.
Detailed steps for cleaning internal components like ADF glass, rollers, and pad ASSY.
Step-by-step instructions for replacing the Pad ASSY consumable.
Detailed procedure for replacing the pick roller consumable on the scanner.
