What to do if my Fujitsu ScanSnap S510 Scanner cannot be turned on?
If your Fujitsu Scanner won't turn on, ensure the Power/USB cable is correctly connected. Try disconnecting and reconnecting the power cable, waiting at least 5 seconds before reconnecting. Also, make sure the paper chute is open. Wait until Windows has fully started, as the LED turns off during startup or sleep mode. Finally, ensure you press the [POWER] button.
Why Fujitsu ScanSnap S510 scanning speed is very slow?
If your Fujitsu Scanner's scanning speed is very slow: * Verify that your PC meets the recommended system requirements. If not, clear the "Correct skewed character strings automatically" and "Allow automatic image rotation" check boxes under [Scanning] - [Option] in the "ScanSnap Manager - Scan and Save Settings" dialog box to increase speed. * If connected via USB 1.1, and your PC has a USB 2.0 port, connect the scanner to the USB 2.0 port. Ensure the USB hub also supports USB 2.0 if one is being used.
What to do if the scanned images cannot be read in Fujitsu Scanner?
If the scanned images cannot be read when using your Fujitsu Scanner, and you've scanned documents written in small letters, right-click the "ScanSnap Manager" icon on the task bar and select either "Best" or "Excellent" in the [Scanning] tab. Then, scan them again.
How to remove overlaid images on the back of pages in Fujitsu ScanSnap S510 Scanner?
To remove overlaid images (noise) from the back side when scanning a two-sided document with your Fujitsu Scanner, mark the "Setting for text only document." checkbox in the "Read mode option" dialog box ([Option] on the [Scanning] tab of the "ScanSnap Manager - Scan and Save Settings" dialog box).
Why Fujitsu ScanSnap S510 Scanner file size of a scanned black & white image is the same as that of a scanned color document image?
If the file size of a scanned black & white image is the same as a color image with your Fujitsu Scanner, ensure you've selected "B&W" from the [Color mode] drop-down list on the [Scanning] tab in the "ScanSnap Manager - Scan and Save Settings" dialog box.
How to fix lines on the document are blurred in Fujitsu ScanSnap S510?
If lines on the document are blurred when using your Fujitsu Scanner: If you are scanning in color mode, documents including handwritten or typed text, tables or frames with ruled lines, select the check box for [Setting for text only document] at [Scanning] - [Option] in the "Scan and Save Settings" window. If it does not improve even after you have tried this method, change "Image quality…" setting.
How to fix the generated image shifts or is distorted in Fujitsu ScanSnap S510?
If the generated image shifts or is distorted when using your Fujitsu Scanner, ensure the document is loaded correctly. Refer to section 3.3 in the “ScanSnap S510 Operator’s Guide”.
How to fix vertical lines appear in the scanned image of Fujitsu ScanSnap S510?
If vertical lines appear in scanned images from your Fujitsu Scanner, clean the inside of the ADF (Automatic Document Feeder) following the instructions in "5. Daily Care".
Why Fujitsu ScanSnap S510 image scanned is too light or too dark?
If the scanned image from your Fujitsu Scanner is too light or too dark, adjust the "Brightness" setting under [Scanning] - [Option] in the "ScanSnap Manager - Scan and Save Settings" dialog box. This applies to black and white scanning only.
How to fix Fujitsu ScanSnap S510 multi-feeds occur frequently?
If multi-feeds occur frequently with your Fujitsu Scanner: * Clean the Pad ASSY. * If cleaning doesn't resolve the issue, replace the Pad ASSY. * Ensure the document stack is no thicker than 5 mm.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | - bit |
| Maximum scan size | 216 x 356 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Minimum storage drive space | 512 MB |
| Minimum system requirements | Windows 2000/ XP/ Vista |
| Sustainability certificates | ENERGY STAR |
| Power requirements | AC 100V to 240V, 50 / 60 Hz |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | RoHS |
Weight and Dimensions| Weight | 2700 g |
|---|
Details important information for safe and correct product operation, including warning symbols.
Instructions to verify all items are present after unpacking the scanner and contact support if missing.
Guides through the installation process of necessary software like ScanSnap Manager, Acrobat, etc.
Provides steps for connecting the scanner to a computer via power and USB cables.
Guides on how to modify various scanning parameters through ScanSnap Manager settings.
Covers various settings and operations within the ScanSnap Manager software.
Step-by-step instructions for safely removing jammed documents from the scanner.
A guide to diagnosing and resolving common scanner issues and symptoms.
Detailed steps for cleaning internal components like ADF glass, rollers, and pad ASSY.
Step-by-step instructions for replacing the Pad ASSY consumable.
Detailed procedure for replacing the pick roller consumable on the scanner.
To Next Page