Why Fujitsu ScanSnap S510 image scanned is too light or too dark?
If the scanned image from your Fujitsu Scanner is too light or too dark, adjust the "Brightness" setting under [Scanning] - [Option] in the "ScanSnap Manager - Scan and Save Settings" dialog box. This applies to black and white scanning only.
How to fix Fujitsu ScanSnap S510 multi-feeds occur frequently?
If multi-feeds occur frequently with your Fujitsu Scanner: * Clean the Pad ASSY. * If cleaning doesn't resolve the issue, replace the Pad ASSY. * Ensure the document stack is no thicker than 5 mm.
What to do if my Fujitsu Scanner is not scanning?
If scanning does not start on your Fujitsu Scanner, ensure the USB cable is correctly connected. If using a hub, verify its power supply. Disconnect and reconnect the AC adapter/cable (power cable), waiting at least 5 seconds. Ensure ScanSnap Manager is installed. If the 'ScanSnap Manager' icon isn't visible, start it from [Start] -> [All Programs] -> [ScanSnap Manager] -> [ScanSnap Manager]. Finally, update the ScanSnap Manager driver via Device Manager, try turning the scanner off and on again, connect the scanner directly to your PC if using a USB hub, and restart your PC. If problems persist, reinstall ScanSnap Manager.
Why Fujitsu ScanSnap S510 scanning speed is very slow?
If your Fujitsu Scanner's scanning speed is very slow: * Verify that your PC meets the recommended system requirements. If not, clear the "Correct skewed character strings automatically" and "Allow automatic image rotation" check boxes under [Scanning] - [Option] in the "ScanSnap Manager - Scan and Save Settings" dialog box to increase speed. * If connected via USB 1.1, and your PC has a USB 2.0 port, connect the scanner to the USB 2.0 port. Ensure the USB hub also supports USB 2.0 if one is being used.
Why Fujitsu ScanSnap S510 Scanner is not turning on?
If your Fujitsu Scanner isn't turning on, try these steps: * Ensure the AC/USB cable and AC adapter are correctly connected. * Disconnect and reconnect the power cable, waiting at least 5 seconds before reconnecting. * If the scanner's power is controlled by the Paper chute cover, make sure to open it. * If power is controlled by the computer, wait until Windows has fully started, as the LED might turn off during startup or in sleep mode. * If the paper chute cover is open, press the [POWER] button on the scanner.
Why do I get 'Insufficient memory' error when converting to Word/Excel with Fujitsu ScanSnap S510 Scanner?
If you receive an "Insufficient memory" error when converting to Word/Excel, install additional memory if the installed memory size is smaller than the recommended size. Also, exit other applications and retry scanning.
What to do if files created by using the ScanSnap cannot be opened with a specified application?
If files created by ScanSnap cannot be opened with a specified application, verify the location of the Image saving folder, and then delete corrupted files, if any. After that, retry scanning.
Why business cards cannot be scanned when the ScanSnap Quick Menu is used on Fujitsu ScanSnap S510?
If business cards can't be scanned when using the ScanSnap Quick Menu, start CardMinder, and then press the [SCAN] button while CardMinder is active. The scanned business card images will then appear in CardMinder.
Why applications cannot be selected in the ScanSnap Manager settings?
If you can't select an application in advance, use Left-Click Menu Mode by unchecking [Use ScanSnap Quick Menu] on the Right-Click Menu.
How to display the Left-Click Menu on Fujitsu ScanSnap S510 Scanner?
To display the Left-Click Menu, uncheck [Use ScanSnap Quick Menu] on the Right-Click Menu. Also, close the "ScanSnap Manager - Scan and Save Settings" dialog box.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | - bit |
| Maximum scan size | 216 x 356 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Auto document feeder (ADF) input capacity | 50 sheets |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Minimum storage drive space | 512 MB |
| Minimum system requirements | Windows 2000/ XP/ Vista |
| Sustainability certificates | ENERGY STAR |
| Power requirements | AC 100V to 240V, 50 / 60 Hz |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | RoHS |
Weight and Dimensions| Weight | 2700 g |
|---|
Details important information for safe and correct product operation, including warning symbols.
Instructions to verify all items are present after unpacking the scanner and contact support if missing.
Guides through the installation process of necessary software like ScanSnap Manager, Acrobat, etc.
Provides steps for connecting the scanner to a computer via power and USB cables.
Guides on how to modify various scanning parameters through ScanSnap Manager settings.
Covers various settings and operations within the ScanSnap Manager software.
Step-by-step instructions for safely removing jammed documents from the scanner.
A guide to diagnosing and resolving common scanner issues and symptoms.
Detailed steps for cleaning internal components like ADF glass, rollers, and pad ASSY.
Step-by-step instructions for replacing the Pad ASSY consumable.
Detailed procedure for replacing the pick roller consumable on the scanner.
To Next Page