Fujitsu ScanSnap S510

Other manuals for Fujitsu ScanSnap S510

Quick Installation Guide2 pages

Cleaning Instructions2 pages

Specifications2 pages

Getting Started Guide30 pages

Questions and Answers

J
John HoltSep 16, 2025
What to do if Fujitsu ScanSnap S510 is not recognized?
- N
  Nicholas TuckerSep 16, 2025
  If your Fujitsu Scanner is not recognized even after ScanSnap Manager is installed, and the scanner is registered as 'Other device' in the 'Device Manager', go to the [Start] menu, select [Control panel] -> [System] -> [Hardware] -> [Device Manager]. Delete the device name (such as USB device, which varies with the OS) under 'Other Device' in the [Device Manager], and then restart your PC.
D
Debbie SpearsAug 28, 2025
How to adjust image brightness on Fujitsu Scanner?
- C
  Carolyn EspinozaAug 28, 2025
  If the scanned image is too light or too dark, adjust "Brightness" at [Scanning] - [Option] in the "ScanSnap Manager - Scan and Save Settings" dialog box.
G
Garrett JohnsonAug 31, 2025
Why does 'Document size incorrect' appear when scanning with the Carrier Sheet on my Fujitsu ScanSnap S510 Scanner?
- J
  jonathan40Sep 1, 2025
  If you receive a "Document size incorrect" message when scanning with the Carrier Sheet, ensure you are only putting one small-size material (photo/post card) into the Carrier Sheet per scan.
I
iphelpsAug 31, 2025
Why scanned images are not displayed on the screen with Fujitsu ScanSnap S510 Scanner?
- A
  Andrew CurryAug 31, 2025
  If scanned images aren't displayed when "Allow automatic blank page removal" is enabled, right-click the ScanSnap Manager icon on the task bar, select [Setting] > [Scanning] tab, and click the [Option] button. Then, clear the "Allow automatic blank page removal" checkbox.
P
Patrick Stevens MDAug 31, 2025
Why a profile cannot be created with currently configured settings on Fujitsu Scanner?
- R
  Rebecca GatesAug 31, 2025
  To create a profile with your desired settings, uncheck [Use ScanSnap Quick Menu] and switch to Left-Click Menu Mode.
A
Ashley JacksonAug 30, 2025
What to do if the scanned images cannot be read with Fujitsu ScanSnap S510 Scanner?
- K
  Kevin MclaughlinAug 31, 2025
  If the scanned images cannot be read and small letters are squashed, right click the ScanSnap Manager icon on the task bar and select "Best" or "Excellent" in the [Scanning] tab and scan them again.
D
Dr. Christopher Ramos Jr.Aug 30, 2025
How to remove noise from back side image when scanning a two-sided document with Fujitsu ScanSnap S510?
- J
  Jessica WilliamsAug 30, 2025
  To remove noise from the back side image when scanning a two-sided document, mark the "Setting for text only document" checkbox. This sharpens characters, lines, and contrasts while reducing background noise. Note that this can also be used for documents including photos and illustrations, though it may affect contrasts and colors.
A
Adam SalazarAug 30, 2025
Why is the file size of a scanned black & white image the same as a scanned color document image with Fujitsu Scanner?
- A
  Anne FloydAug 30, 2025
  If the file size of a scanned black & white image is the same as a color image, select "B&W" from the [Color mode] drop-down list on the [Scanning] tab in the "ScanSnap Manager - Scan and Save Settings" dialog box.
J
Jamie LewisAug 29, 2025
Why a part of the document does not appear in the scanned image with Fujitsu ScanSnap S510?
- M
  mbatesAug 29, 2025
  If a part of the document doesn't appear in the scanned image, clear the check box for "Allow automatic blank page removal" on [Option] of the [Scanning] tab of [Scan and Save Settings].
J
Jillian WoodAug 29, 2025
How to display ScanSnap Quick Menu?
- T
  Todd CarrollAug 29, 2025
  To display the ScanSnap Quick Menu, mark [Use ScanSnap Quick Menu] on the Right-Click Menu.

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS