Fujitsu ScanZen Eco Series User Manual

6
4. Installing the Driver
Follow the steps below to install the driver for ScanZen onto your computer.
1
If you have an administrator on a shared network, be sure you log into Windows® as a
user with administrator privileges.
3
2
4
5
Quit any other applications that are running on your computer.
Follow the instructions from the Installation Wizard to complete the installation.
Download the following file onto your hard drive.
Run the file that you downloaded in step 2. This creates a folder named “Disk1” in
the same folder where the program is stored. Installation starts automatically after
self-extraction. If it doesn’t start, double-click “Setup.exe” which is located in the Disk1 folder.
PaperStream IP (TWAIN) for ScanZen 1.54.0.xxxx
PSIPTWAIN-SZ-1_54_0c.exe (xx,xxx,xxx Bytes)

Fujitsu ScanZen Eco Series Specifications

General

Brand	Fujitsu
Model	ScanZen Eco Series
Category	Scanner
Language	English