En-4
OPERATION
To select the indoor unit
Press the Select button to select the indoor unit.
1st indoor unit 2nd indoor unit 8th indoor unit All indoor units
WEEKLY TIMER
The timer function is not available depending on the initial setting.
● Different schedules can be set for each day of the week.
● Four timers can be set for each day.
● Operation on/off time, operation mode, and temperature can be specified for each timer.
To start/cancel the WEEKLY timer operation
The for the selected indoor unit lights, and the operating status is displayed.
* If all indoor units are selected, all of the registered indoor units are controlled at the same time.
* If all indoor units are selected,
appears on the Timer and Clock Display.
Press the ALL TIMER button to start or cancel the WEEKLY timers for all indoor units.
• If any of the indoor units are in the timer mode, pressing this
button cancels the timers for all indoor units.
• If none of the indoor units are in the timer mode, pressing
this button starts the timers for all indoor units.
Press the Timer Mode (DELETE) button to start or cancel the WEEKLY timers for the indoor units se-
lected by the Select button.
Press the PROGRAM (CLOCK AD-
JUST) button.
* Do not press this button for two sec-
onds or more, otherwise you will en-
ter the time setting mode.
2
Press the Select button to select the indoor unit.
* If all indoor units are selected, the times for all of the registered indoor unit
timers are set at once.
1
3
CLOCK ADJUST
● Day of the week setting
DAY
Press the DAY button to select the day of the week.
* For ALL, all of the days can be set together when a
appears around
each day.
To Next Page
Loading...
Need help?
General
