To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu UTY-DMMYM and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | UTY-DMMYM |
| Category | Remote Control |
| Display | LCD |
| Compatibility | Fujitsu |
| Functions | Mode, Temperature, Fan Speed, Timer |
| Operating Temperature | -10°C to 50°C |
Crucial safety guidelines to prevent death or serious injury.
Overview of the central remote controller's capabilities and operational modes.
Details on the physical components and buttons of the controller.
Step-by-step guide for initial setup of the controller upon first use.
Procedure for powering on the air conditioning system after a power outage or off-season.
Instructions to verify the displayed time and how to adjust it.
How to activate and deactivate the key lock function to prevent accidental operation.
Overview of the main monitor screen displaying indoor unit status and basic information.
Explanation of marks and symbols used to indicate operating modes on the screen.
How connected indoor units and their operating status are shown on the screen.
Display of signs for effective set-up functions and invalid settings.
Accessing menus for Operation, Function, and Schedule settings.
How to start or stop all operating indoor units using the main On/Off button.
Introduction to available operation settings like On/Off, mode, temperature, and fan speed.
Navigation steps to access the operation screen from the monitor menu for unit selection.
How to perform operations or settings for all connected indoor units simultaneously.
How to select and configure individual indoor units for operation.
Covers specific settings like On/Off, mode, temperature, fan speed, 10°C heat, and economy.
Overview of available function settings like 10°C heat (All), Economy (All), and low noise operation.
Navigation steps to access the Function screen from the monitor menu.
Enabling or disabling the 10 °C heat operation for all indoor units.
Enabling or disabling the economy mode for all indoor and outdoor units.
Setting the low noise operation for the outdoor unit and its time period.
Selecting schedule patterns and days of the week for timer operations.
Information on setting schedule names ("Schedule 1", "Schedule 2") and time/operation patterns.
Navigation steps to access the Schedule screen from the monitor menu.
How to apply a single schedule pattern to all indoor units simultaneously.
How to set individual schedule patterns for each indoor unit.
Covers selecting schedule name, enabling/disabling, choosing days, and setting times/operations.
Overview of settings available in submenus, including Date/Time, Screen, R.C. prohibit, and Initial settings.
How to navigate from the monitor screen to the submenu screen using the Menu button.
Setting the current date, time, summer time, and display format.
Adjusting screen backlight settings like automatic off time, brightness, and contrast.
Prohibiting operation of the standard remote controller for specific indoor units.
Setting the display language and temperature unit for the controller.
Guidance on checking common issues and symptoms before requesting service.
Information on error codes displayed by the controller and their meanings.
