Need help?Do you have a question about the Fujitsu UTY-DCGYZ3 and is the answer not in the manual?
General| Model | UTY-DCGYZ3 |
|---|---|
| Category | Remote Control |
| Display | LCD |
| Compatibility | Fujitsu Air Conditioners |
| Features | Timer |
| Functions | Mode, Temperature, Fan Speed, Timer |
Important safety information for the user's safety and to prevent damage.
Overview of the Central remote controller's capabilities and system integration.
Overview of how the system is configured, linking operation and master setting systems.
Explains how to use the touch panel display and navigate the controller.
Procedure for performing initial settings after controller installation.
Explains the two modes for monitoring operation status and displaying unit information.
Customizes displayed items on the monitoring screen, such as Mode and Room Temp.
Enables batch or individual operation settings for groups and R.C.G.s.
Manages and sets up operation schedules for groups and R.C.G.s.
Configures the specific details for timer settings within schedules.
Sets grouping and group names operated from the controller.
Sets the volume of operating noise for outdoor units.
Adjusts preference settings like backlight, sound, date, and password.
Accesses maintenance functions like error history and sensor value display.
Configures installer-specific settings like language, addresses, and units.
Steps to log in and access the remote control interface.
Monitors the operation status of groups and R.C.G.s.
Changes the password for accessing system settings.
Changes the display order of groups on the unit interface.
Sets the temperature unit for system display.
Manages user accounts, their IDs, passwords, types, and group access.
Displays error contents when special states occur, like errors or refrigerant leakage.
Describes how emergency stop pop-ups are displayed due to external signals.
Lists error codes and their corresponding contents for troubleshooting.
To Next Page