Fujitsu UTY-DMMYM User Manual

En-19
Note
If selected indoor units are set up individually, it is neces-
sary to set each individually. As other methods, after all
indoor units are set by the same schedule, each indoor
unit is changed in the setting or deleted.
1
8-3. Schedule setting
8-3-1. Selection of schedule name
1
Select the relevant schedule name (“Schedule 1” or
“Schedule 2”) with the [Screen switch button (Left/
Right)].
Mo 10:00AM
Schedule 1
Schedule 2
Back: Setting:
Day
Su Mo Tu We Th Fr Sa
Time
End
Room 1
1 – – : – – AM – – –
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – – : – – AM – – –
Disable
Mo 10:00AM
Schedule 2
Schedule 1
Back: Setting:
Day
Su Mo Tu We Th Fr Sa
Time
End
Room 1
1 – – : – – AM – – –
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – – : – – AM – – –
Disable
Notice
• When “Schedule select” is set, it is displayed from
the selected schedule. Refer to [7. FUNCTION
SETTING].
• “Schedule 1” and “Schedule 2” cannot be applied to
each indoor unit simultaneously.
Make sure to set the same schedule name when
applying the schedule at the same time.
Note
In this screen, the current day of the week is displayed
on the front side.
Setting of each day in the week can be checked by
pressing the [Cursor button (Left/Right)].
2
When Schedule name is selected, proceed to [8-3-2.
Setting of Enable/Disable of schedule].
8-3-2. Setting of Enable/Disable of
schedule
1
Select “Disable” (or “Enable”) with the [Cursor button
(Up/Down)] and press the [Enter button].
Mo 10:00AM
Schedule 1
Schedule 2
Back: Setting:
Day
Su Mo Tu We Th Fr Sa
Time
End
Room 1
1 – – : – – AM – – –
2 – –
: – – AM – – –
3 – –
: – – AM – – –
4 – – : – – AM – – –
Disable
2
As “Disable” (or “Enable”) is highlighted, set “Enable” (or
“Disable”) with the [Cursor button (Up/Down)].
Mo 10:00AM
Schedule 1
Schedule 2
Cancel: Setting:
Day
Su Mo Tu We Th Fr Sa
Time
End
Room 1
1 – – : – – AM – – –
2 – –
: – – AM – – –
3 – –
: – – AM – – –
4 – – : – – AM – – –
Enable
When fi xed by pressing [Enter button], reversed display
is released.
When set to “Enable”, proceed to [8-3-3. Selection of
the day of the week].
Note
• Set to “Enable” when schedule operation is per-
formed. When releasing the schedule operation tem-
porarily, set to “Disable”.
• If each indoor unit is set, only the indoor units are
set to “Enable”, schedule operation is performed.
• When shipped from the factory, all the indoor units
are set to “Disable”.
Notice
When only the switch of “Enable” or “Disable” was set,
select “End” with the [Cursor button (Up/Down)] and
press the [Enter button], the setting is completed.
Screen switch
button (Left)
Screen switch
button (Right)
Check the schedule name
9380221012-03_OM_en.indd 199380221012-03_OM_en.indd 19 30/11/2553 15:25:0330/11/2553 15:25:03

Fujitsu UTY-DMMYM Specifications

General

Brand	Fujitsu
Model	UTY-DMMYM
Category	Remote Control
Language	English