Fujitsu UTY-DMMYM - Outdoor unit low noise operation setting

En-16
7-3-3. Outdoor unit low noise operation
setting
1
Select “O.U. low noise” with the [Cursor button (Up/
Down)] and press the [Enter button].
Mo 10:00AM
Function
Operation Schedule
10 °C Heat (All)
Schedule select
Disable
Schedule 1
Economy (All) Disable
O.U. low noise Disable
Back: Setting:
2
O.U. low noise screen is displayed. Select “O.U. low
noise” with the [Cursor button (Up/Down)] and press
the [Enter button].
Mo 10:00AM
O.U. low noise
Schedule select
Start time Stop time
Time setting
O.U. low noise Disable
– – : – –
AM
–
– – : – –
AM
Back: Setting:
3
Since the setting items are highlighted, set “Enable”
with the [Cursor button (Up/Down)], and press the
[Enter button]. Reversed display of “O.U. low noise” is
released.
Mo 10:00AM
O.U. low noise
Schedule select
Cancel: OK:
Start time Stop time
Time setting
O.U. low noise
– – : – –
AM
–
– – : – –
AM
Enable
4
Set a time for low noise operation. Select “Time setting”
with the [Cursor button (Up/Down)] and press the [Enter
button].
Mo 10:00AM
O.U. low noise
Schedule select
Start time Stop time
Time setting
O.U. low noise
– – : – –
AM
–
– – : – –
AM
Enable
Back: Setting:
5
“Hour” of “Start time” is highlighted. Set the “Hour” with
the [Cursor button (Up/down)].
Mo 10:00AM
O.U. low noise
Schedule select
Cancel: OK:
Start time Stop time
Time setting
O.U. low noise
Enable
– – : – –
AM
–
– – : – –
AM
Notice
Display of time is the same style as the setting. Refer to
[9. SUBMENU SETTING].
6
Select “Minute” with the [Cursor button (Left/Right)],
and set by the same procedure as “Hour”.
(Setting can be made in unit for 5 minutes.)
Mo 10:00AM
O.U. low noise
Schedule select
Cancel: OK:
Start time Stop time
Time setting
O.U. low noise
Enable
10 : 00
AM
–
12 : 05
AM
Set “Hour” and “Minute” for the “Stop time” continuously.
7
When fi xed by pressing the [Enter button], the indica-
tion of function is displayed in the upper part of the
screen.
Mo 10:00AM
O.U. low noise
Schedule select
Start time Stop time
Time setting
O.U. low noise Enable
Back: Setting:
10 : 00
PM
–
7 : 00
AM
To set other items, select the item with the [Cursor but-
ton (Up/Down)].
8
To return to the “Function” screen, press the [Cancel
button].
To complete the setting, the display returns to the
“Monitor” screen when the [Menu button] is pressed.
Notice
• Set “Hour” and “Minute” together with “Start time”
and “Stop time”. (It does not operate with an
incomplete setting.)
• Cannot set the same time for the “Start time” and
“Stop time”.
9380221012-03_OM_en.indd 169380221012-03_OM_en.indd 16 30/11/2553 15:25:0230/11/2553 15:25:02