En-10
5. ON/OFF BUTTON OPERATION
1
1
5-1. Operation with On/Off button
1
The operation starts when the [On/Off button] is pressed
once while all indoor units are stopped.
Notice
[On/Off button] can be operated while “Monitor screen”
is displayed. Refer to [4. MONITOR SCREEN].
Note
·
By this operation, the indoor units start operating
with the setting (operation mode, fan speed and
temperature) when last operation stopped.
·
Refer to [6. OPERATION SETTING] if operating
selected indoor units, switching the operating mode,
or setting the fan speed and temperature.
2
When the [On/Off button] is pressed once while operat-
ing, all the operating indoor units stop.
Note
When the 10 °C heat (All) function is selected, all indoor
units start the 10 °C heat operation. This is convenient
when going out.
Refer to [7. FUNCTION SETTING] for 10 °C heat (All).
6. OPERATION SETTING
1
1
6-1. About the Operation setting
These can vary the operation or operation settings. Available
settings or operations are as follows.
On/Off operation
On/Off for all indoor units or a selected indoor unit
can be set.
After selecting the operating indoor units, follow the
instructions in [6-3-1. On/Off operation].
Operation mode setting
Operating mode for all indoor units or a selected
indoor unit can be set.
After selecting the setting indoor units, follow the
instructions in [6-3-2. Operation mode setting].
Room temperature setting
Temperature for all indoor units or a selected indoor
unit can be set.
After selecting the setting indoor units, follow the
instructions in [6-3-3. Room temperature setting].
Fan speed setting
Fan speed of each selected indoor unit can be set.
After selecting the setting indoor units, follow the
instructions in [6-3-4. Fan speed setting].
10 °C heat setting
10 °C heat operation of each selected indoor
unit can be set.
After selecting the setting indoor unit, follow the
instructions in [6-3-5. 10 °C heat setting].
If setting 10 °C heat operation for all indoor
units, refer to [7. FUNCTION SETTING].
Economy setting
Economy setting of each selected indoor unit can
be set.
After selecting the setting indoor units, follow the
instructions in [6-3-6. Economy setting].
When economy operation is set for all indoor units,
follow the instructions in [7. FUNCTION SETTING].
On/Off button
9380221012-03_OM_en.indd 109380221012-03_OM_en.indd 10 30/11/2553 15:25:0230/11/2553 15:25:02
To Next Page
Loading...
