En-26
11
9-5. R.C. prohibition setting
1
Select “R.C. prohibit” with the [Cursor button] and press
the [Enter button].
“R.C. Prohibition” screen is displayed.
Submenu
Screen
Initial
Mo 10:00AM
Setting:
Monitor:
Date/Time
R.C. prohibit
2
Select indoor unit (Room X) or “All units” with the [Cursor
button (Up/Down)] and press the [Enter button].
When indoor units cannot be displayed in a screen, ope-
rate by referring to the gauge at the right edge.
Mo 10:00AM
R.C. prohibition
Screen Initial
Cancel: OK:
Room 1
Permit
Room 2
Permit
Room 3
Permit
Room 4
Permit
All units
Mo 10:00AM
R.C. prohibition
Screen Initial
Cancel: OK:
Room 1
Permit
Room 2
Permit
Room 3
Permit
Room 4
Permit
All units
Mo 10:00AM
R.C. prohibition
Screen Initial
Cancel: OK:
Room 1
Permit
Room 2
Permit
Room 3
Permit
Room 4
Permit
All units
Gauge
3
As the setting item is highlighted, set “Permit” or “Pro-
hibit” with the [Cursor button (Up/Down)] and press the
[Enter button].
Mo 10:00AM
R.C. prohibition
Screen Initial
Cancel: OK:
Room 1
Permit
Room 2
Permit
Room 3
Permit
Room 4
Permit
All units Prohibit
4
Reversed display is released when the [Enter button] is
pressed.
(If set to “All units”, the same setting is displayed in
each indoor unit).
When setting other indoor units, repeat the same pro-
cedure.
5
When [Cancel button] is pressed, the display returns to
the “Submenu” screen.
In addition, if the [Menu button] is pressed, the display
returns to the “Monitor” screen.
Notice
The indoor unit displayed like
the right is set from the indoor
unit and outdoor unit to the
remote control prohibition. In this case, setting cannot
be made by the Central remote controller. When this
indoor unit is selected, below indication is displayed
on the lower screen, and cannot proceed to the next
operation.
Screen Initial
Cancel:
Op. restricted:
This indoor unit cannot be setting by the operation of
“All units”.
Room 2
9380221012-03_OM_en.indd 269380221012-03_OM_en.indd 26 30/11/2553 15:25:0430/11/2553 15:25:04
To Next Page
Loading...
Need help?
General
