Fujitsu UTY-RVN*M User Manual

En-11
4. TIMER SETTING
4-1. Switching to the “Timer” screen
1
In “Menu” screen, select [Timer] with the [Cursor button
(Up/Down)], and press the [Enter button].
Menu
Function
Timer
Submenu
Mo 10:00
Setting:
Back:
2
“Timer” screen is displayed. To return to the “Menu”
screen, press the [Cancel button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
4-2. Timer setting items
4-2-1. On timer setting
1
In “Timer” screen, select [On timer] with the [Cursor
button (Up/Down)], and press the [Enter button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
2
“On timer” screen is displayed.
On timer
Enable/Disable setting
Time setting
Disable
0.5 hour later
Mo 10:00
Auto-off timer
Off timer
Setting:
Back:
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
On timer
Enable/Disable setting
Time setting
Enable
0.5 hour later
Mo 10:00
Auto-off timer
Off timer
OK:
Cancel:
4
For [Time setting], adjust the time with the [Cursor but-
ton (Up/Down)], and press the [Enter button] to com-
plete the setting.
On timer
Enable/Disable setting
Time setting
Enable
hour later
Mo 10:00
Auto-off timer
Off timer
OK:
Cancel:
6.0
Note
The [Time setting] can be set up to 24 hours in units of
30 minutes.
When you return to the “Monitor” screen, the icon is displayed.
When the timer is enabled, the remaining time until the timer
expires is displayed in the message balloon.
To check the function, press the [Enter button] and select the
icon.
Menu
Monitor
Mo 10:00
O f f
On timer: Remaining 6.0 hour
End:
9380221043_OM.indb 11 8/22/2012 3:54:59 PM

Fujitsu UTY-RVN*M Specifications

General

Brand	Fujitsu
Model	UTY-RVN*M
Category	Controller
Language	English