Need help?Do you have a question about the Fukuda Denshi CardiMax FX-8322 and is the answer not in the manual?
General| Channels | 12 |
|---|---|
| Input Impedance | ≥10 MΩ |
| CMRR | ≥100 dB |
| Display | LCD |
| Printing Method | Thermal |
| Paper Speed | 5/10/25/50 mm/s |
| Sensitivity | 2.5/5/10/20 mm/mV |
| Frequency Response | 0.05 - 150 Hz |
| Power Supply | AC 100-240V, 50/60Hz |
| Data Storage | Internal memory, SD card |
| Type | Electrocardiograph |
Explains the meaning of danger, warning, caution labels, and symbols.
Provides critical safety advice for operation and maintenance.
Covers explosion risks, label importance, and environmental handling.
Safety advice for parts, battery, media, and general operation.
Crucial safety considerations for performing maintenance and calibration.
Provides a general overview of the CardiMax FX-8322/FX-8322R ECG device.
Details the technical specifications and operating conditions of the ECG equipment.
Outlines safety precautions related to the specifications.
Covers the power supply requirements and capabilities of the device.
Lists the functional parameters of the ECG device, including input, display, and recording.
Specifies the operating, transportation, and storage environmental requirements.
Offers guidance on electromagnetic compatibility and interference.
Identifies and describes the various parts and connectors of the equipment.
Illustrates the external view of the ECG device with labeled components.
Provides detailed names and functional descriptions of the equipment's parts.
Explains the overall hardware configuration and system block diagram.
Gives a high-level overview of the hardware components and their interconnections.
Presents the internal block diagram showing major functional units and connections.
Details the operational functions of various sub-units within the equipment.
Shows the internal wiring and connection diagram of the FX-8322/FX-8322R.
Lists the part numbers, names, descriptions, and quantities for replacement parts.
Provides instructions for disassembling and assembling the equipment's various sections.
Details steps for removing upper and lower case components.
Provides steps for disassembling the recorder unit in parts.
Details disassembly for CRT block and general assembly drawings.
Explains the process for updating the equipment's software.
Shows the locations and types of caution and warning labels on the device.
Provides guidance on diagnosing and resolving common issues with the equipment.
Covers general repair and service procedures.
Explains causes and remedies for various error messages.
Addresses hardware-related problems and their solutions.
Lists symptoms and remedies for startup issues.
Covers problems occurring while the equipment is running.
General information and notes on performing maintenance on the equipment.
Important safety precautions and guidelines for performing maintenance.
Instructions for cleaning the equipment safely and effectively.
Procedures for replacing internal electronic components and boards.
Step-by-step guide to removing the CPU board.
Procedure for removing the operation board.
Steps for disassembling and removing the LCD module.
Procedure for removing the ECG amplifier board.
Presents a safety block diagram for reference during maintenance.
Outlines procedures for daily and periodic maintenance checks.
Important safety precautions for performing maintenance and checks.
Details the checklist and procedures for daily equipment checks.
Details the procedures for periodic maintenance and safety checks.
Specific safety checks, including leakage current measurements.
Lists manufacturer-specific maintenance tests for the equipment.
Introduces the various manufacturer maintenance items available.
To Next Page