50 EN
FUNCTION SETUP
Initialise the setting or SD Memory Card.
1 In stop mode, press [SETUP].
2 Use [K / L] to select , then press [ENTER].
3 Use [K / L] to select a desired option, then
press [ENTER].
“Setup”:
Resets the setup menu to the default. The setting for
“Parental”, “Network Connection” and “Mode Select”
will not be reset.
“Format SD Card”:
(Available only when an SD Memory Card is
inserted.):
Initialises the SD Memory Card.
“Erase Saved BD-ROM Data (Player)”:
Clears the data saved for the BD-ROM contents, such as
BD-ROM game scores, from this player.
“Erase Saved BD-ROM Data (SD Card)”:
(Available only when an SD Memory Card is
inserted.):
Clears the supplemental data for the BD-ROM playback,
such as subtitle data, from the SD Memory Card.
“Network Settings”:
Resets the network setting to the default.
4 Confirmation message will appear.
Use [K / L] to select “Yes”, then press [ENTER].
• Final confirmation message will appear.
Press [ENTER].
5 Press [SETUP] to exit.
Initialise
[SETUP] A “Initialize”
Caution
• Do not remove the SD Memory Card while executing
the “Format SD Card” or the “Erase Saved BD-ROM
Data (SD Card)”. It damages the card.
• “Format SD Card” and “Erase Saved BD-ROM Data (SD
Card)” are not available when a Blu-ray Disc is in the
unit.
Note
• The setting for “Parental”, “Network Connection” and
“Mode Select” will not be reset.
E1T12ED_EN.book Page 50 Tuesday, August 3, 2010 5:13 PM
To Next Page
Loading...
