EasyManua.ls Logo

FUNAI HT2-M200 - Specifications

FUNAI HT2-M200
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56 EN
OTHERS
Specifications
General
Signal system NTSC/PAL colour
Power requirements 220 - 240 V AC, 50 Hz
Power consumption 70 W (standby: 0.7 W)
Total output power (Amplifier) Home theater mode: 1000 W
FTC* output power: 700 W
*(Main Ch @ 1 kHz within 10% THD, Sub Ch 60 Hz within 2.5% THD)
Dimensions (width x height x depth) 435 x 59 x 297 mm
Weight Total weight: 12.50 kg
Main unit: 3.70 kg
Operating temperature 5°C to 40°C
Operating humidity Less than 80 % (no condensation)
Terminals
Front
SD card slot
slot x 1
MP3 LINE-IN jack
mini jack x 1 500 mVp-p (75)
Rear
Analogue audio output
(SPEAKERS (4))
front and rear speakers System: Full range satellite
Impedance: 4
Frequency response: 180 Hz ~ 20 kHz
Dimensions: 100 x 130 x 100.5 mm
Weight: front - 0.54 kg
rear - 0.51 kg
centre speaker System: Full range satellite
Impedance: 4
Frequency response: 180 Hz ~ 20 kHz
Dimensions: 100 x 130 x 100.5 mm
Weight: 0.73 kg
subwoofer Impedance: 4
Speaker drivers: 160 mm woofer
Frequency response: 60 Hz ~ 150 Hz
Dimensions: 149.5 x 310.5 x 308 mm
Weight: 3.76 kg
Video output
RCA jack x 1 1 Vp-p (75)
Component video output
RCA jack x 3 Y: 1 Vp-p (75) P
B: 700 mVp-p (75) PR: 700 mVp-p (75)
Analogue audio input (AUX)
RCA jack x 2 L/R:2 Vrms (47k)
Digital audio input (Coaxial)
RCA jack x 1 500 mVp-p (75)
HDMI output
HDMI jack x 1 Video: 480p/576p, 720p, 1080i, 1080p, 1080p24 / Audio
LAN terminal 10BASE-T / 100BASE-TX
RADIO
FM ANT jack × 1
Tuning range: FM 87.5 - 108 MHz (100kHz)
Antenna terminal: 75 (unbalanced)
Note
The specifications and design of this product are subject to change without notice.
E1T12ED_EN.book Page 56 Tuesday, August 3, 2010 5:13 PM

Table of Contents

Other manuals for FUNAI HT2-M200