FUNAI LCD-A2006 - Flicker Adjustment

6-2 L4620EA
*1 PAL-BG (LCD-A2006), PAL-I (LCD-B2006),
SECAM-L (LCD-C2006), PAL-BG/DK (LCD-D2006)
2. Flicker Adjustment
1. Enter the Service mode. (See page 6-1.)
2. Press [2] button on the remote control unit.
The following screen appears.
3. If Flicker Adjustment is not fit, the screen becomes
the following.
4. Press [CH. o / p] buttons on the remote control
unit so that flash stops.
C-BRT(NTSC)
MENU → 9
128
C-CNT(NTSC) 128
C-CLR-R(NTSC) 150
C-CLR-B(NTSC) 150
C-TNT(NTSC) 120
C-SHR(NTSC) 143
BRIGHT 0 0
NORMAL 0 65
DARK 0 98
COR(C/D/S-1) VOL. p → 1 128
COG(C/D/S-1) VOL. p → 2 128
COB(C/D/S-1) VOL. p → 3 128
DR(C/D/S-1) VOL. p → 4 180
DG(C/D/S-1) VOL. p → 5 180
DB(C/D/S-1) VOL. p → 6 180
SBR(C/D/S-1) VOL. p → 70
SBB(C/D/S-1) VOL. p → 90
C-COR(C/D/S-2) VOL. p → 1 128
C-COG(C/D/S-2) VOL. p → 2 128
C-COB(C/D/S-2) VOL. p → 3 128
C-DR(C/D/S-2) VOL. p → 4 140
C-DG(C/D/S-2) VOL. p → 5 140
C-DB(C/D/S-2) VOL. p → 6 140
C-SBR(C/D/S-2) VOL. p → 70
C-SBB(C/D/S-2) VOL. p → 90
7F
VOL. p
FF
LAST POWER OFF
SYSTEM *1
NCM ON
ASPECT OFF
RUSSIAN OFF
ITEM
BUTTON
(on the remote
control)
DATA
VALUE
VCOM
128
VCOM
128
FLASH (Go and Off)