43
Recording / Dubbing
EN
6 Repeat the steps 3 to 5 until you
select all programmes to be dubbed.
To delete a title:
1 Select a title using [Cursor
/ ], then press
[ENTER].
2 Select “Delete” using [Cursor
/ ] then
press [ENTER].
3 Select “Yes” using [Cursor
/ ], then press
[ENTER].
To move a title:
1 Select a title using [Cursor
/ ], then press
[ENTER].
2 Select “Move” using [Cursor
/ ], then
press [ENTER].
3 Enter a desired insert point using
[Cursor
/ ], then press [ENTER].
7 After registering all the programmes
you want, select “Start” using
[Cursor
/ / / ], then press
[ENTER].
8 Select a desired Rec Mode using
[Cursor
/ ], then press [ENTER].
• Depending on the dubbing direction or the
recording format type, the available Rec Mode
will vary.
9 Select “Yes” using [Cursor / ],
then press [ENTER].
• Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [DUBBING] for 4 seconds.
Note
• You cannot change the device mode between VCR
and HDD / DVD during the HDD / DVD to VCR
dubbing.
• If you want to watch the duplicated material, after
the DVD to VCR duplication, press [VCR] first then
press [PLAY P].
01/01/07(Mon) 19:53
HDD ➔ VCR Dubbing
Please Select Rec Mode
Fast XP SP LP EP SLP Auto
01/01/07(Mon) 19:53
HDD
➔ VCR Dubbing
Please Select Rec Mode
Fast XP SP LP EP SLP Auto
Start dubbing.
OK to proceed?
Start dubbing.
OK to proceed?
No
Yes
HDD
To Next Page
