To Next PageTo Next PageHow to fix FUNAI W4D-D4180DB if power does not turn on?
If the FUNAI DVD Recorder doesn't turn on, ensure the mains cable is securely connected. Also, check the breaker in case of a power failure.
What to do if there is no picture on FUNAI DVD Recorder?
If there's no picture on your FUNAI DVD Recorder, check that the signal cables are securely connected and that they are not damaged. Verify the connections to your TV and switch the input selector on your TV (for example, to 'AV1') until a picture appears.
What to do if FUNAI DVD Recorder shows 'Disc Error – Please eject the disc'?
If you are getting the error message 'Disc Error – Please eject the disc' on your FUNAI DVD Recorder, it could be due to an unplayable disc being inserted. Try inserting a standard disc. Also, make sure the disc is not upside down; insert it with the labelled side facing up.
What does 'Region Error' mean on FUNAI W4D-D4180DB DVD Recorder?
If you see the 'Region Error' message on your FUNAI DVD Recorder, it means the DVD-Video inserted is not authorized for playback in your region. Insert a DVD-Video with region codes 2 or ALL.
Why are TV programme pictures distorted on FUNAI W4D-D4180DB DVD Recorder?
If the TV programme pictures are distorted on your FUNAI DVD Recorder, adjust the direction of the TV antenna. You can also adjust the picture. Place the antenna and the TV farther apart, and separate any bunched antenna cables and the TV.
What to do if FUNAI DVD Recorder timer recording fails?
If the FUNAI DVD Recorder is not recording even though the timer was set correctly, it could be due to a power failure during recording. Reset the clock. If the unit’s internal clock stopped due to a power failure, unplug the mains cable from the AC outlet and plug it in again. It may also be that the programme contains copy protection signals that restrict copying, or the timer setting overlapped with another setting that was set later or has priority.
Why FUNAI DVD Recorder timer recording is incomplete?
If timer recording is not completed or did not start from the beginning on your FUNAI DVD Recorder, it may be because the timer setting overlapped with another setting that has priority, or there was not enough disc or tape space.
Why can't I change channel on FUNAI W4D-D4180DB while recording?
If you cannot change the channel from the channel you are recording on your FUNAI DVD Recorder, set the TV input to 'TV'.
Why is the playback picture distorted on FUNAI W4D-D4180DB?
If the playback picture is distorted on your FUNAI DVD Recorder, do not bring equipment that may cause electrical interference, such as a cellular phone, near the unit.
Why is there no sound from FUNAI W4D-D4180DB?
If there is no sound from your FUNAI DVD Recorder, check if all cables are connected securely and that they are not damaged. Also, check the connections to the amplifier input, and verify if the input source setting on the amplifier is correct. Ensure the recorder is not in Pause mode, Slow-motion Playback mode, Fast Forward, or Fast Reverse mode.
General| Type | DVD Recorder |
|---|---|
| Audio System | Dolby Digital |
| HDMI Output | Yes |
| Recording Formats | DVD-RW, DVD-R, DVD+RW, DVD+R |
| Playback Formats | DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, CD |
| Connectivity | HDMI |
| Disc Compatibility | DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW |
| Outputs | HDMI |
