To Next PageTo Next PageHow to fix FUNAI W4D-D4180DB if power does not turn on?
If the FUNAI DVD Recorder doesn't turn on, ensure the mains cable is securely connected. Also, check the breaker in case of a power failure.
What to do if there is no picture on FUNAI DVD Recorder?
If there's no picture on your FUNAI DVD Recorder, check that the signal cables are securely connected and that they are not damaged. Verify the connections to your TV and switch the input selector on your TV (for example, to 'AV1') until a picture appears.
What to do if FUNAI DVD Recorder shows 'Disc Error – Please eject the disc'?
If you are getting the error message 'Disc Error – Please eject the disc' on your FUNAI DVD Recorder, it could be due to an unplayable disc being inserted. Try inserting a standard disc. Also, make sure the disc is not upside down; insert it with the labelled side facing up.
What does 'Region Error' mean on FUNAI W4D-D4180DB DVD Recorder?
If you see the 'Region Error' message on your FUNAI DVD Recorder, it means the DVD-Video inserted is not authorized for playback in your region. Insert a DVD-Video with region codes 2 or ALL.
Why are TV programme pictures distorted on FUNAI W4D-D4180DB DVD Recorder?
If the TV programme pictures are distorted on your FUNAI DVD Recorder, adjust the direction of the TV antenna. You can also adjust the picture. Place the antenna and the TV farther apart, and separate any bunched antenna cables and the TV.
What to do if FUNAI DVD Recorder timer recording fails?
If the FUNAI DVD Recorder is not recording even though the timer was set correctly, it could be due to a power failure during recording. Reset the clock. If the unit’s internal clock stopped due to a power failure, unplug the mains cable from the AC outlet and plug it in again. It may also be that the programme contains copy protection signals that restrict copying, or the timer setting overlapped with another setting that was set later or has priority.
Why FUNAI DVD Recorder timer recording is incomplete?
If timer recording is not completed or did not start from the beginning on your FUNAI DVD Recorder, it may be because the timer setting overlapped with another setting that has priority, or there was not enough disc or tape space.
Why can't I change channel on FUNAI W4D-D4180DB while recording?
If you cannot change the channel from the channel you are recording on your FUNAI DVD Recorder, set the TV input to 'TV'.
Why is the playback picture distorted on FUNAI W4D-D4180DB?
If the playback picture is distorted on your FUNAI DVD Recorder, do not bring equipment that may cause electrical interference, such as a cellular phone, near the unit.
Why is there no sound from FUNAI W4D-D4180DB?
If there is no sound from your FUNAI DVD Recorder, check if all cables are connected securely and that they are not damaged. Also, check the connections to the amplifier input, and verify if the input source setting on the amplifier is correct. Ensure the recorder is not in Pause mode, Slow-motion Playback mode, Fast Forward, or Fast Reverse mode.
General| Type | DVD Recorder |
|---|---|
| Audio System | Dolby Digital |
| HDMI Output | Yes |
| Recording Formats | DVD-RW, DVD-R, DVD+RW, DVD+R |
| Playback Formats | DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, CD |
| Connectivity | HDMI |
| Disc Compatibility | DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW |
| Outputs | HDMI |
Warnings and safety advice to reduce risk of fire or electric shock.
Information on laser safety, potential eye injury, and radiation exposure.
Details on connecting the unit to the AC outlet and operating it.
General cautions for safe operation, ventilation, heat, magnetic fields, etc.
Information on recycling packaging materials, batteries, and environmental contribution.
Guidelines for placement, electrical shock, fire risks, and moisture condensation.
Details on copyright restrictions and progressive scan output compatibility.
Instructions for cleaning the unit, discs, handling, and servicing.
Information on the automatic video head cleaning function.
Details on DVD and VCR recording capabilities, programming, and dubbing.
Information on playback options, quick search, and DVD editing functions.
Information on playing back discs recorded in Video mode on regular DVD players.
Explains symbols used to indicate recording modes or disc types in the manual.
Detailed description of each button and indicator on the front panel of the unit.
Identifies and describes each jack and connector on the rear panel of the unit.
Detailed description of each button on the remote control for various functions.
Explains the functions and operations of various remote control buttons.
Instructions for inserting batteries into the remote control and caution notes.
How to select the component (VCR or DVD) to operate using device select buttons.
Explains information displayed on screen during DVD and VCR mode playback and recording.
How to navigate menus and overview of general setting options.
Options for DVD menu setup and CD playback modes like Format and Finalise.
Explains front panel symbols, indicators, and operational messages.
Instructions for connecting the unit to a TV using Scart, RF, S-Video, and Component Video jacks.
Connecting for progressive scan and using S-Video, Component Video, and Audio Out jacks.
Connecting DVD players, VCRs, or camcorders using Scart or RCA cables.
How to connect for digital audio output for better sound quality using optical/coaxial.
How to connect audio decoders and MD/DAT decks and set audio output.
Steps to take after all connections are made, including switching TV input.
Step-by-step guide for initial setup including language selection and channel tuning.
How to automatically scan and store broadcast channels available in the area.
Step-by-step instructions for manually tuning each channel and setting position.
Information on channel frequency bands, decoder settings, and selecting channels.
How to set the unit to skip channels or move channels in the list.
How to change the language for the On-Screen Display menu.
Manual procedure for setting the date and time for the unit's clock.
How to set the TV aspect ratio for optimal picture display on different screen types.
Details on recordable disc types, formats (VR/Video), recording speed, and copy control.
Steps and effects of finalising discs and how to format a DVD-RW disc.
How to set aspect ratio for recording and manage automatic chapter markers.
Steps to reformat a disc and how to select sound modes for recording.
Choosing between stereo or bilingual audio for recording external input.
Selecting audio formats for bilingual broadcasts and high-quality recording options.
Step-by-step guide to recording a TV programme onto a disc or tape.
Simple method to set recording length in 30-minute blocks using REC/OTR button.
How to set up to 12 programmes for daily or weekly timer recordings.
Explains how the unit handles overlapping timer programmes and priorities.
How to check, cancel, or correct programmed timer recordings and understand error codes.
How to stop a timer recording that is currently running.
Important notes regarding timer recording, power failures, and priority of overlapped settings.
How to set up the unit to record automatically via external tuner control.
How to select video input types (Video In, S-Video In) for external equipment.
Step-by-step process for recording from external sources to disc or tape.
How to set up the dubbing mode for VCR to DVD or DVD to VCR copying.
Detailed steps and notes for copying from VCR to DVD, including picture distortion.
Detailed steps and notes for copying from DVD to VCR, including recording speed.
How to protect titles from accidental editing or erasing using the Setup menu.
Steps to finalise discs for playback on other players and cancelling finalisation.
How to set discs to finalise automatically when disc space runs out.
Information on playable discs, colour systems (PAL/NTSC), and region codes for DVD playback.
Steps for playing back DVD-RW/DVD-R, DVD-V discs, and navigating menus.
Steps for playing back audio CDs and files containing MP3 or JPEG formats.
How to navigate and play MP3/JPEG files and folders, including file specifications.
How to play back Kodak Picture CD discs containing digital photographs.
Steps for playing back DivX® files and selecting subtitle extensions.
How to display subtitles for DivX® files, including activation and file naming requirements.
Details on playing back DivX® VOD rental files and tips for file playback limitations.
How to obtain and use registration codes for DivX® Video-On-Demand files.
How to navigate and use the disc menu for playback options like subtitles and chapters.
How to select and play back titles from a DVD's title menu.
How to resume playback from where stopped and use fast forward/reverse.
How to skip commercials, pause/resume, and play back at rapid speeds.
How to advance playback frame by frame or play back at slow forward/reverse speeds.
How to zoom in on the picture during playback and select zoom factors.
How to assign specific points on a disc to return to later using markers.
How to search for specific titles, chapters, or tracks on discs.
How to directly search for a track using the number buttons.
How to go to a specific point on a tape by entering the exact time to skip.
How to set repeat playback for titles, chapters, discs, tracks, or A-B points.
How to play back discs randomly or in a programmed order.
How to select the display time for JPEG files in a slide show.
How to select subtitle languages and switch audio soundtracks.
How to enable virtual surround sound for a 2-channel stereo system.
How to switch camera angles and reduce block noise in playback.
Introduction to editing discs recorded in PAL system, and available editing functions.
How to check titles and overview of editing functions like naming, dividing, and protecting.
How to delete unwanted titles and edit title names on the disc.
Detailed guide on how to enter title names using character sets and the keypad.
How to add or delete chapter markers at specific points in a title.
How to set or clear chapter markers for Video Mode DVD-RW discs.
How to protect titles from accidental editing or erasure by setting protection.
How to split a title into two or merge two titles into a single title.
How to add titles to a playlist and delete all playlists from a disc.
How to delete specific sections (scenes) from a title for editing.
Table of playback settings like Parental Lock, Audio Out, and Disc Menu Language.
Table of display settings like TV System, OSD Language, Screen Saver, and FL Dimmer.
Settings for video aspect ratio, recording options, and DivX configuration.
Options within the playback menu, including Parental Lock and Audio Out settings.
Settings for dynamic range, PCM sampling, Dolby Digital, MPEG, and audio languages.
Settings for angle icons, still image modes, and TV system selection.
Settings for OSD language, screen saver time delay, and front panel display brightness.
Settings for TV aspect ratio, video input selection, and video output modes, including progressive scan.
Options for DivX® VOD registration and setting DivX® subtitle language.
How to reset all unit settings to their factory defaults.
Steps for playing back a tape, including pause, resume, and stop functions.
Basic recording procedure and one-touch timer recording (OTR) for VCR.
How to use Index Search and Time Search to locate specific points on a tape.
Functions like picture search, freeze, slow motion, auto repeat playback, and video colour system change.
Information on recording and playback of Hi-Fi stereo sound and sound modes.
Common symptoms and remedies for problems with the unit's operation, remote control, and static electricity.
Common problems encountered during DVD playback and their solutions.
Common symptoms and remedies for VCR playback, recording, and remote control problems.
Lists common error messages, their causes, and suggested solutions.
A comprehensive list of language codes used for various settings in the manual.
Explanations of technical terms used throughout the manual, like Analogue audio, Aspect ratio, Chapter, CPRM, etc.
Technical details of the system, power, dimensions, recording formats, and audio specifications.
States compliance with EMC and Low Voltage Directives and lists relevant safety standards.
