To Next PageTo Next PageWhy is my FUNAI WL6D-M102 DVD Recorder remote control not working?
If the FUNAI DVD Recorder's remote control isn't working, first, replace the batteries, as they may be weak or missing. Ensure there are no obstructions between the remote and the unit. Try moving closer to the unit while using the remote.
What to do if there is no image from HDMI connection on FUNAI WL6D-M102?
If you're not getting an image from the HDMI connection on your FUNAI DVD Recorder, check the HDMI connection and the HDMI related indications. Verify that your connected monitor or device supports HDCP, as the unit requires HDCP support to output a video signal. Review the HDMI settings and confirm that the output format of the DVD recorder (HDMI FORMAT) matches the supported input format of the connected device. Note that connecting the unit to an unauthorized display device with an HDMI cable may prevent audio and video signals from outputting when playing a commercial DVD-video.
How to fix FUNAI WL6D-M102 DVD Recorder if the power does not turn on?
If your FUNAI DVD Recorder isn't powering on, make sure the AC power cord is securely connected. Also, check the remote control batteries, as weak batteries can prevent the unit from turning on.
What to do if the image from the external device cannot be displayed on FUNAI DVD Recorder?
If the image from an external device is not displaying on your FUNAI DVD Recorder, try pressing the [AUX G \ H] button repeatedly to select the correct channel. Ensure all connected devices are turned on. Also, check that all connections are securely and correctly made.
Why does 'Repairing' appear on the TV screen when using FUNAI DVD Recorder?
If 'Repairing' appears on your FUNAI DVD Recorder's screen, it indicates that a repairing process has automatically begun. This usually happens after a power failure or unplugging during recording, finalising, formatting, or editing. This process may take from several minutes up to several hours.
Why timer recording cannot be performed on FUNAI DVD Recorder?
Timer recording on your FUNAI DVD Recorder might fail if the internal clock has stopped due to a power failure lasting more than 30 seconds. Reset the clock to resolve this issue.
How to cancel the repairing process on FUNAI WL6D-M102 DVD Recorder?
To cancel the repairing process on your FUNAI DVD Recorder, press [OPEN\CLOSE A] on the front panel, then select “Yes” and press [ENTER]. After that, press [OPEN\CLOSE EJECT A] to take out the disc. Be aware that the disc cancelled during the repairing process MAY NOT work.
General| Brand | FUNAI |
|---|---|
| Model | WL6D-M102 |
| Category | DVD Recorder |
| Language | English |
Important safety warnings and guidelines for proper appliance usage.
Classification and precautions related to the unit's laser product.
Information regarding the unit's power connection and live parts.
Safety precautions to prevent electrical hazards and fire risks.
Detailed description of the remote control buttons and their functions.
Instructions for connecting the unit to a television via Scart or component video.
Instructions for connecting and using the HDMI output for high-definition video and audio.
Connecting other audio-video devices via AV1, AV2, or DV(AV3) inputs.
First-time setup procedure including language and basic configuration.
Details on disc types, recording formats (VR, Video), and their compatibility.
Explanation of DVD-RW and DVD-R formats, VR and Video modes.
Limitations on recording copy-protected content and CPRM compatibility.
Procedure to finalise discs for playback on other DVD players.
Steps to format a blank DVD-RW disc into Video or VR mode.
Selecting Video or VR mode for formatting a blank DVD-RW disc.
Steps to format a recordable disc, including confirmation.
How to perform basic recording and set up One-touch Timer Recording.
Steps to start and pause a basic recording session.
Simple method to set recording time in 30-minute blocks.
Programming up to 12 programmes for future recording, including daily/weekly options.
Entering programme date, time, input source, media, and speed.
Managing programmed timer recordings: checking, cancelling, or correcting.
List of error codes related to timer recording and their meanings.
Setting up automatic recording based on external tuner signals.
Steps to prepare the external tuner and this unit for satellite link recording.
Instructions for recording from external sources like DVD players or VCRs.
Procedure for dubbing content from a DVC to a DVD.
Copying discs to videotapes or videotapes to discs.
Steps to copy content from a VCR tape to a DVD disc.
Making discs playable on other DVD players by finalising them.
General steps for playing back DVDs, including title and chapter navigation.
Instructions for playing back DVD-RW and DVD-R discs.
Steps for playing standard DVD-Video discs, including menu navigation.
Playing back a recorded title while recording continues.
Playing back a recorded title during current recording or Timer Recording.
Searching for specific titles or chapters during playback.
Methods for finding specific titles or chapters using buttons or the display menu.
Navigating and viewing the list of recorded titles for playback and editing.
Understanding the elements and information displayed in the title list.
Procedure to delete unwanted titles from a DVD disc.
Renaming titles directly on the disc.
Steps and character input guide for editing title names.
Removing specific scenes or sections from a title.
Table of contents for the setup menu and default settings.
Configuring recording parameters like audio type, finalise, and aspect ratio.
Choosing between DVD to VCR or VCR to DVD dubbing modes.
Common steps for accessing and activating settings within the General Setting menu.
Step-by-step guide to accessing and selecting options in the General Setting menu.
Configuring parental control levels and passwords.
Setting parental control levels, managing passwords, and understanding restrictions.
Procedures for setting, changing, or resetting the parental lock password.
Instructions for playing back prerecorded videotapes.
Steps to insert, play, pause, and stop videotapes.
Performing basic VCR recording and setting up One-touch Timer Recording.
Steps to start, pause, and resume basic VCR recording.
Setting the recording time in 30-minute blocks for VCR.
Dubbing content from a DV camcorder to a VCR tape.
Solutions for problems related to power, unit operation, and remote control.
Resolving general issues like no picture/sound, clock errors, and DV input problems.
Resolving problems related to recording impossibility, timer recording, and disc repairing.
Addressing issues like copy protection, disc capacity, and CPRM compatibility.
Troubleshooting issues with timer recording, including clock errors and power failures.
Resolving playback problems like aspect ratio, picture distortion, and sound issues.
Troubleshooting distorted pictures, abnormal colours, and lack of sound or subtitles.
List and explanation of error messages and their corresponding solutions.
Resolving errors related to discs, USB devices, region codes, and parental locks.
Troubleshooting various recording errors, including copy protection and disc compatibility.
Specific error messages related to recording limitations like title/chapter limits and disc finalisation.
Addressing errors when exceeding title or chapter limits, or control information issues.
Troubleshooting errors related to already finalised discs.
