FUNAI WL6D-M102 - Specifications - General; Specifications - Recording; Specifications - Input;Output

71
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
Specifications
Note
The specifications and design of this product are subject to change without notice.
General
VCR video heads Four heads
Power requirements 220–240 V ± 10 %, 50 Hz ± 0.5 %
Power consumption 35 W
Power consumption (standby) 0.5 W
Weight 5.0 kg
Dimensions (width x height x depth) 435 x 99.5 x 388 mm
Operating temperature 5°C to 40°C
Operating humidity Less than 80 % (no condensation)
Recording
Recording format Video Recording (VR) format (DVD-RW only), video format (DVD-RW, DVD-R)
Recordable discs DVD-ReWritable, DVD-Recordable
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Input/Output
Front Panel :
DV input
DV 4-pin jack
IEEE 1394
USB input
TYPE A
USB 2.0
Bus power current: MAX. 500 mA
Rear Panel :
Audio input /output
Input /output level
Two 21-pin scart sockets (AV1, AV2)
2 Vrms (input impedance: more than 10 k  / output impedance: less than 1 k  )
Video input /output
Input /output level
Two 21-pin scart sockets (AV1, AV2)
1 Vp-p (75 ) each
Component video output
Output level
Three RCA connectors
Y: 1.0 Vp-p (75 )
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p (75 ) each
Audio output
Output level
Two RCA connectors
2 Vrms (output impedance: 680 )
Digital audio output
Output level
One Coaxial pin jack
500 mVp-p (75 )
HDMI output HDMI jack
E9RF0FH_EN.book Page 71 Friday, May 16, 2014 7:17 PM