18
Connections
EN
Connecting a Dolby Digital™ decoder or
MPEG decoder
• Connecting multi-channel Dolby Digital decoder
allows you to enjoy the Multi-channel Dolby Digital
surround system as well as Multi-channel surround
system.
• After connecting to a Dolby Digital decoder, set
“Dolby Digital” to “Stream” in the Audio Out menu.
(See page 63.)
• After connecting to a MPEG decoder, set “MPEG” to
“Stream” in the Audio Out menu. (See page 63.)
Connecting to an MD deck or DAT deck
• The audio source recorded in Dolby Digital Multi-
channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
• If not connected to a Dolby Digital decoder, set
“Dolby Digital” to “PCM” in the Audio Out menu.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
• Set “Dolby Digital” and “MPEG” to “PCM” in the
Audio Out menu for connecting to an MD or DAT
deck.
• You can use AUDIO OUT jacks for the connection of
your audio system.
After You Have Completed
Connections
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the
Owner’s Manual of your TV.
Note
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the effects of the copy protection system.
E9G04ED_EN.book Page 18 Tuesday, March 27, 2007 10:27 AM
To Next Page
Loading...
