11
Before You Start
EN
18 PROG. U / D buttons (DVD / VCR)
DVD mode
• Press to change the channel up or down.
VCR mode
• Press to change the channel up or down.
• Press to adjust the tracking during playback or
in slow motion of the tape.
• While playback is in still mode, you can adjust
the vertically blurred picture.
19 INPUT SELECT button (DVD / VCR)
• Press to select the appropriate input.
20 SETUP button (DVD / VCR)
• Press to display the Setup menu in stop mode.
21 CLEAR button (DVD / VCR)
DVD mode
• Press to clear the password once entered.
• Press to cancel the programming for a disc.
• Press to clear the selecting marker number in
the marker setup mode.
• Press to clear the programme once entered in
the timer recording setting mode.
VCR mode
• Press to reset the tape counter.
22 ENTER button (DVD / VCR)
• Press to acknowledge or approve a menu
selection.
23 RETURN R button (DVD / VCR)
• Press to return to the previously displayed menu
screen.
24 DVD button (DVD)
• Press to select the DVD output mode. (See
page 12.)
25 CM SKIP button (DVD)
During playback, press to skip 30 seconds.
(See page 46.)
26 PLAY P button (DVD / VCR)
• Press to start or resume playback.
27 f button (DVD / VCR)
DVD mode
• During playback, press to forward fast.
• When playback is paused, press to forward
slowly.
VCR mode
• Press to rapidly advance the video tape.
• Press to view the picture rapidly in forward
during playback.
28 PAUSE p button (DVD / VCR)
• Press to pause playback or recording.
29 SKIP B button (DVD)
• During playback, press twice in quick
successions to skip to the previous chapter or
track.
• When playback is paused, press to play reverse
step by step.
SKIP F button (DVD)
• During playback, press to skip to the next
chapter or track.
• When playback is paused, press to advance
step by step.
30 AUDIO button (DVD / VCR)
DVD mode
• When receiving a bilingual broadcast, press to
change the audio out setting to “Main”, “Sub”,
and “Main/Sub”.
• Press to change the bilingual audio source of an
external equipment to “Main”, “Sub”, or “Main/
Sub”. (Available only when the “External Input
Audio” in the Setup menu is set to “Bilingual” in
advance.)
• Press to display the audio menu during
playback.
• Press to select the sound mode.
VCR mode
• During playback of a Hi-Fi video tape, press to
change the audio out setting to “STEREO”,
“LEFT”, “RIGHT”, and “MONO”.
• When receiving a bilingual broadcast, press to
change the audio out setting to “Main”, “Sub”,
and “Main/Sub”.
• Press to change the bilingual audio source of an
external equipment to “Main”, “Sub”, or “Main/
Sub”. (Available only when the “External Input
Audio” in the Setup menu is set to “Bilingual” in
advance.)
31 STOP S button (DVD / VCR)
• Press to stop playing back or recording.
32 ZOOM button (DVD)
• During playback, press to enlarge the picture on
the screen.
33 REPEAT button (DVD / VCR)
DVD mode
• Press to select the repeat mode.
VCR mode
• Press to set or release the Auto Repeat
Playback.
Note
• If you turn off this unit, [OPEN / CLOSE O] on the
remote control is not available.
• Be sure to use [OPEN / CLOSE O] or
[STOP / EJECT SO] on the unit.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly
with the operations using the remote control. Some
operations can be carried out using the buttons on
the front panel.
E9G04ED_EN.book Page 11 Tuesday, March 27, 2007 10:27 AM
To Next Page
Loading...
