15
Before You Start
EN
Front Panel Display Guide
1 Current status of the unit
p : Appears when disc playback is paused.
Appears also during step by step
playback.
B : Appears when playing back a disc.
: Appears during slow forward playback.
: Appears when the timer programming or
One-touch Timer Recording (OTR) is set
and is operating.
Appears when the unit goes into the
Satellite Link standby mode.
Flashes when all the timer programmes
are finished.
Flashes when there is an error in
programming.
I: Appears when recording.
Flashes when recording being paused.
: Appears when a tape is in the unit.
DB: Appears when dubbing.
: Appears when a disc is in this unit.
DVD: Appears when this unit is in DVD output
mode, or the timer-standby mode for DVD
recording.
Flashes when switch to the timer-standby
mode while programming cannot set.
Flashes when a programme cannot be
performed for some reasons.
VCR: Appears when this unit is in VCR output
mode, or the timer-standby mode for VCR
recording.
Flashes when switch to the timer-standby
mode while programming cannot set.
Flashes when a programme cannot be
performed for some reasons.
*
I, , DB, and DVD will be displayed
simultaneously during VCR to DVD duplication
process.
I, , DB, and VCR will be displayed
simultaneously during DVD to VCR duplication
process.
2 Title / Track and Chapter number
: Title / track number
: Chapter number
3 Displays the following
• Playing back time
• Current title / chapter / track number
• Recording time / remaining time
•Clock
• Channel number
• VCR tape counter
• One-touch Timer Recording (OTR) remaining
time
Display Messages
The disc tray is
opening.
The disc tray is
closing.
A disc is loading.
Data is being
recorded on a disc.
VCR
DVD
DB
3
2
1
DVD
DVD
DVD
DVD
E9G04ED_EN.book Page 15 Tuesday, March 27, 2007 10:27 AM
To Next Page
Loading...
