Need help?Do you have a question about the Funlux NVR and is the answer not in the manual?
Ensure NVR is powered off and unplugged before sliding off the cover for HDD access.
Connect the HDD using SATA cables and insert it into the designated red zone within the NVR.
Fasten the HDD with screws and reattach the NVR cover securely using case screws.
Plug the NVR into a power outlet using the provided power adapter.
Delete and re-add cameras, or disable auto-search and add manually.
Check internet connectivity and NVR connection to the router.
Ensure NVR is connected/powered; reconnect phone to WiFi and retry setup.
General| Compression | H.264 |
|---|---|
| Operating System | Embedded Linux |
| Video Output | 1 channel HDMI, 1 channel VGA |
| Recording Resolution | 1080P/720P |
| Hard Drive Support | 1 SATA |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to +55°C |
| Channels | 4/8/16 |
To Next Page