Furinno 17017 - User Manual

Need help?

Do you have a question about the Furinno 17017 and is the answer not in the manual?

Summary

Assembly Instructions

Hardware and Parts Identification

Lists all hardware components and furniture parts required for assembly.

Preparation and Assembly Steps

Provides essential tips and visual guidance for the initial stages of assembly.

Assembly Steps Continuation

Visual guide for the later stages of assembling the end table, including rotation.

Safety Warnings and Load Limits

Important safety precautions, maximum load limits, and restrictions for unit usage.

Customer Support Information

Contact details and resources for customer assistance, missing parts, or assembly help.

The Furinno Turn-N-Tube Tall End Table, model 17017, is a compact and versatile piece of furniture designed to fit into various spaces and budgets. Its primary function is to serve as an end table, providing a surface for items and potentially offering storage, depending on the configuration. The design emphasizes ease of assembly and a minimalist aesthetic.

Technical Specifications:

Model: 17017
Dimensions: 15.6" (W) x 28" (H) x 11.6" (D)
Assembly Time: Approximately 10 minutes
Recommended Assembly Personnel: 1 Person
Tools Required: None (No Tools Required)
Maximum Load Capacity: The unit is designed to support specific maximum loads, which are not explicitly detailed in terms of weight but are implied to be critical for stability. Exceeding these limits can lead to sagging, instability, product collapse, or serious injury.

Components and Hardware:

The table consists of several key components and hardware pieces, categorized for clarity:

Hardware List:

Insert Cap: 4 pieces (These likely cover the ends of poles or screw holes for a finished look).
Extra Short Pole: 8 pieces (Used for connecting panels and providing vertical support).
Extra Long Pole: 4 pieces (Used for the main vertical structure, likely for the full height of the table).
Round Leg: 4 pieces (These form the base of the table, providing stability and elevating it from the floor).
Non Woven Bin: 1 piece (This suggests an optional or integrated storage bin, likely fabric-based, for soft storage).

Parts List:

Top Panel (A): 1 piece (The uppermost surface of the table).
Shelf / Bottom Panel (B): 2 pieces (These serve as intermediate shelves or the base of the table structure).
Apron Panel (C): 2 pieces (These likely form the side enclosures or decorative elements around a shelf or the base).

Usage Features:

Simple Assembly: The "Turn-N-Tube" design implies a screw-in or twist-together assembly method, eliminating the need for external tools. This is a significant user-friendly feature, making it accessible even for individuals with limited DIY experience.
Compact Design: With its dimensions, the table is suitable for smaller spaces, such as apartments, dorm rooms, or as an accent piece in larger rooms.
Versatile Placement: Its function as an "end table" suggests it can be placed next to sofas, beds, or in entryways.
Storage Capability: The inclusion of a "Non Woven Bin" indicates that the table offers a degree of soft storage, useful for magazines, remote controls, or other small items, helping to keep the area tidy.
Modular Appearance: The assembly diagrams show a multi-tiered structure, allowing for different levels of display or storage. The "Rotate 180°" instruction for a specific component (likely the base or a shelf) suggests flexibility in how certain parts are oriented, potentially affecting the aesthetic or functional outcome.
Unfinished Surface (Internal): Some diagrams indicate "Unfinished surface" on certain internal parts. This is a common practice to reduce manufacturing costs for areas not typically visible, but users should be aware that these areas might not have the same aesthetic finish as external surfaces.

Maintenance Features:

Cleaning: The manual recommends cleaning the product with a mild cleanser using a soft, damped cloth. It specifically advises against using harsh or abrasive cleansers, which could damage the finish or material. This suggests the table's surfaces are relatively easy to maintain with standard household cleaning practices.
Load Management: A critical maintenance and safety feature is the warning regarding maximum load limits. Users are explicitly cautioned against exceeding these limits to prevent structural damage, instability, and potential injury. This highlights the importance of understanding the table's structural integrity and using it within its intended capacity.
Child Safety: A stern warning is provided: "DO NOT allow children to climb on unit." This is a crucial safety instruction, emphasizing the potential for instability or collapse if the unit is subjected to climbing, which could lead to serious injury.
Hardware Compatibility: The manual advises against using incompatible hardware, stating it "might cause damage to product." This implies that replacement parts, if needed, should be sourced from Furinno or be explicitly compatible to maintain the table's integrity and safety.

Assembly Process (Overview):

The assembly process is broken down into five main steps, visually depicted with clear diagrams:

Step 1: Involves attaching insert caps to the top panel (A) and securing short poles.
Step 2: Connects another panel (B) to the assembly from Step 1 using additional short poles.
Step 3: Continues building the tiered structure by adding another panel (B) and connecting it with poles.
Step 4: Focuses on attaching the long poles and round legs to the base structure, forming the main vertical supports.
Step 5: Shows the final assembly, with all panels and poles connected, and the overall structure of the table.

Important Hints Before Start:

The manual provides essential pre-assembly advice to ensure a smooth and successful build:

Read Carefully: Emphasizes reading each step thoroughly before starting.
Order of Operations: Highlights the importance of performing steps in the correct order to avoid difficulties.
Part Identification: Advises identifying, sorting, and counting all parts before assembly to ensure everything is present.
Protective Assembly Surface: Recommends assembling the furniture on packaging cardboard to prevent scratches or damage to the product or the floor.
Cleaning Instructions: Reiterates the cleaning guidelines mentioned above.
Hardware Compatibility Warning: Reinforces the caution against using incompatible hardware.

In summary, the Furinno Turn-N-Tube Tall End Table is designed as an accessible, easy-to-assemble, and functional piece of furniture for modern living spaces, with a strong emphasis on user safety and straightforward maintenance.