Furman F1500-UPS E User Manual

F1500-UPS E UNINTERRUPTIBLE POWER SUPPLY OWNER’S MANUAL
DIN-00034-A ENG 1-14
FURMAN F1500-UPS E FEATURES
• SMP (Series Multi-Stage Protection) Non Sacrificial Surge Protection
• LiFT (Linear Filtering Technology) Noise Filtration
• EVS (Extreme Voltage Shutdown) Voltage Protection
• True sine wave output
• Line Voltage adjustable (220, 230, 240 VAC)
• Dual Learning IR Output Controls
• BlueBOLT™ Compatible (with BlueBOLT-CV1 interface card, sold separately) or Fully Programmable
RS-232 with Open Source Protocol (Included)
• USB Interface
• Two Programmable Non-Critical Load Management AC Outlet Banks
• Two Critical Load AC Outlet Banks
• Optional Battery Extension Pack available for extended runtime capability
• Optional rear panel mounted TCP/IP addressability module for remote control via internet
COMPATIBLE
BANKS
1 2 3 4
POWER MENU
PROTECTION
OK
F1500-UPS E

Furman F1500-UPS E Specifications

General

Power Rating	1500 VA
Output Voltage Regulation	± 5%
Output Frequency	60 Hz
Output Waveform	Sine Wave
Battery Type	Sealed Lead-Acid (SLA)
Outlet Type	NEMA 5-15R
Topology	Line-Interactive
Typical Recharge Time	8 hours
Frequency	60 Hz
Input Voltage	120V
Output Voltage	120 VAC
Number of Outlets	8
Communication	USB
Protection	Surge, Overload
Transfer Time	4 ms

Summary

Front Panel Installation Procedure

F1500-UPS E Front Panel Installation

Step-by-step guide for attaching the front panel to the F1500-UPS E unit.

Operating Modes

Core Operating Modes

Details Normal Operation, Automatic Voltage Regulation (AVR), and UPS modes.

Setup Menu and Configuration Options

Covers navigation, display, voltage, outlet, IR, buzzer, test, and system settings.

Advanced Operation

Critical Load and IR Control Features

Explains critical load management and IR control for equipment shutdown during power failures.

IR Output Programming Procedure

Step-by-step guide for programming IR output commands for remote control.

Communications Protocol

RS-232 Serial Interface Usage

Explains RS-232 setup, PC connection, and automation integration methods.

RS-232 Command Set and Controller Commands

Details command format, controller commands, and response messages for RS-232 communication.

Commands and Queries

Outlet Bank Control and Battery Threshold Commands

Commands to switch outlet banks and set battery shutoff thresholds.

System Settings and Status Query Commands

Commands for setting buzzer, AVR, feedback, linefeed, and querying system parameters.

Display Settings and System Commands

Display Adjustment and Factory Reset Command

Commands to adjust display brightness, scroll, sleep modes, and reset settings.

Power Cycling and Status Queries

Command for power cycling outlets and queries for outlet/power status.

Status Queries and Command Summary

Status Queries for Voltage, Load, and Battery

Queries to retrieve input voltage, load level, and battery charge status.

Configuration List and Command Summary

Requests a list of all parameters and provides a summary of commands and responses.