Connect Power
Connect the power cord to a GFCI protected AC outlet with an “in-use” waterproof
cover.
CAUTION: Do not connect power cord during cable connecting and TV installation.
GFCI
PROTECTED
OUTLET
GFCI
PROTECTED
OUTLET
50˝ TV Shown
WARNING: TV and GFCI receptacle must be installed a safe distance away from
any water source. Be sure to check local electrical codes and comply with their local
standards.
INSTALL REMOTE CONTROL BATTERY
Your remote control is powered by two (2) AAA batteries.
1. Turn the remote over and remove battery cover.
2. Place two (2) “AAA” batteries into the battery compartment with the “+” and “-“
ends facing as indicated.
3. Replace the cover.
NOTE: Protect the remote with the provided silicone sleeve from damage or
malfunction due to accidental spillage of liquids. Do not immerse the remote control in
water, or expose it to rain to prevent damage or malfunction.
NOTE: Improper use of batteries can result in a chemical leakage or explosion.
● Use only the size and type of battery specified.
● Danger of explosion if batteries are incorrectly replaced.
● If the device is not to be used for a long period of time, remove the battery to
prevent damage or injury from possible battery leakage.
English
C
CD-0007276 Rev: 07-24-23
- 17 -
To Next Page
Loading...
Need help?
General
