17
Install and Use Monitor
2. Press / to set the camera detection
sensitivity as LOW, MEDIUM, HIGH or
(off). Press
to confirm your selection or
press
to return to the previous page.
Notes:
− The higher the detection sensitivity the
easier the motion will be detected. Set
MOTION DETECT to HIGH if you want
the camera to be highly sensitive to
objects moving across its detection area.
− In certain situations, the motion of some
objects may cause undesired trigger
actions. This is not a malfunction.
Picture Setting
1. Use
/ to highlight the LCD AUTO
OFF menu, then press to enter it.
2. Use / to highlight the
BRIGHTNESS, CONTRAST or COLOR
menu, then press to enter it.
3. Press or to change the
BRIGHTNESS, CONTRAST or COLOR
setting. Press to confirm your selection
or press to return to the previous page.
Software Version
Use
/ to highlight the VERSION menu,
then press to enter and view the current
software version.
To Next Page
Loading...
Need help?
General
