16
Install and Use Monitor
2. Press to increase volume or press to
decrease volume.
Auto Dim Setting
1. Use
/ to highlight the AUTO DIM
menu, then press to enter it.
2. Use / to select or .
Press to confirm your selection or press
to return to the previous page.
Press or to enable or disable the light
detect function.
LCD Auto Off Setting
1. Use
/ to highlight the LCD AUTO
OFF menu, then press to enter it.
2. Press / to set the LCD auto off time
as 10 SEC, 20 SEC, 30 SEC or (off).
Press to confirm your selection or press
to return to the previous page.
Motion Detect Setting
When this function is enabled while
the monitor is off, it will turn on again
automatically after any motion is detected by
the camera.
1. Use
/ to highlight the MOTION
DETECT menu, then press to enter it.
To Next Page
Loading...
