15
Install and Use Monitor
− The monitor in a wireless system is
always watching for a video signal when
it is off. Signals from other wireless
camera systems may cause interference.
For example, security cameras, baby
monitors, and even other backup camera
systems can also trigger the monitor to
briefly light up. This is normal for wireless
products.
Change Menu Settings
There are four menu options that allow you to
set up the wireless rear observation system
before operation.
Camera Setting
Use
/ to highlight the SETUP menu,
then press to enter the next page or press
to return to the previous page.
Mirror Setting
1. Use
/ to highlight the MIRROR
menu, then press to enter it.
2. Press / to set the camera image
as NORMAL (0
o
), ROTATE (180
o
), FLIP
(Horizontal Mirror) or FLIP & ROTATE
(Vertical Mirror). Press to confirm your
selection or press to return to the
previous page.
Volume Setting
1. Use
/ to highlight the
VOLUMEmenu, then press to enter it.
To Next Page
Loading...
