Furuno 1623 Operator's Guide

4
Guard Alarm
1. Operate the cursor pad to place the
cursor at the top left corner for the zone
and then press the [ALARM] key.
2. Operate the cursor pad to place the
cursor at the bottom right corner for the
zone and then press the [ALARM] key.
Guard
zone
to set
G(---)
1)Drag cursor to
top left corner for
zone and press
[ALARM].
Drag cursor
here.
Mentally create
the guard zone to set.
2)Drag cursor to
bottom right corner
for zone and press
[ALARM].
Guard zone completed.
Guard
zone
Drag cursor
here.
G(---)
G(---)
PROG Key
1. Press the [PROG] key.
2. Press up or down arrow to choose
appropriate option.
3. Press the [MENU/ESC] key to finish.
Watchman
1. Press the [MENU/ESC] key.
2. Press up or down arrow to choose
WATCHMAN TIME from page 2.
3. Press right arrow.
4. Press up or down arrow to choose
appropriate time out.
5. Press the [MENU/ESC] key to finish.
OSE-35100-A

Furuno 1623 Specifications

General

Power Output	2.2 kW
Display Type	LCD
Waterproof Rating	IPX6
Power Supply	12-24 VDC
Display Size	6 inches
Range	16 nautical miles
Antenna Length	15 inches