Furuno 1623 - Default Chapter; Table of Contents

iii
TABLE OF CONTENTS
FOREWORD............................................ iv
SYSTEM CONFIGURATION..................... v
EQUIPMENT LISTS................................. vi
1. OPERATION........................................ 1
1.1 Controls ............................................... 1
1.2 Indications ........................................... 2
1.3 Turning Power On/Off ......................... 3
1.4 Transmitting, Standby.......................... 3
1.5 Adjusting Display Contrast, Brilliance . 4
1.6 Choosing the Range ........................... 4
1.7 Receiver Sensitivity............................. 4
1.8 Suppressing Sea Clutter ..................... 5
1.9 Suppressing Rain Clutter .................... 6
1.10 Measuring the Range.......................... 6
1.11 Measuring the Bearing ........................ 7
1.12 Shifting the Display ............................. 7
1.13 Zoom ................................................... 8
1.14 User Menu Overview........................... 8
1.15 Heading Line ....................................... 9
1.16 Interference Rejector........................... 9
1.17 Noise Rejector................................... 10
1.18 Echo Trail, Trail Brilliance.................. 10
1.19 Echo Stretch ...................................... 10
1.20 Guard Alarm .......................................11
1.21 Watchman ......................................... 12
1.22 Suppressing Long-range Rain
Clutter................................................ 12
1.23 PROG Key......................................... 13
1.24
Outputting Target Position to a
Plotter ................................................13
1.25 Turning Navigation Data On/Off ........14
1.26 Setting up Nav Data Displays............14
1.27 System Menu.....................................16
2. MAINTENANCE, TROUBLESHOOTING
.........................................................18
2.1 Maintenance ......................................18
2.2 Replacing the Fuse............................19
2.3 Troubleshooting .................................19
2.4 Diagnostics ........................................20
2.5 Test Pattern........................................21
2.6 Clearing the Memory .........................21
2.7 Replacing the Magnetron ..................21
2.8 Replacing the Synchro Belt ................21
3. INSTALLATION..................................22
3.1 Antenna Unit Installation....................22
3.2 Display Unit Installation .....................25
3.3 Wiring.................................................26
3.4 Adjustments .......................................27
3.5 Magnetron Heater Voltage.................29
MENU TREE....................................... MN-1
SPECIFICATIONS ...............................SP-1
PACKING LIST...................................... A-1
OUTLINE DRAWINGS...........................D-1
INTERCONNECTON DIAGRAM ........... S-1
Declaration of Conformity