Furuno 1932 MARK-2 - Menu Tree Overview

vi
MENU TREE
RINGS (Off, 1, 2, 3, max)
EBL OFFSET (Off, On)
SHIFT (Off, On)
ZOOM (Off, On)
MODE (HU, CU, NU, TM)
DISP DATA
ECHO TRAIL (Off, On)
ECHO STRTCH (Off, ES1, ES2)
ARP-10 MENU
OTHER MENU
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Panel Dimmer (1, 2, 3, 4)
Mark Brill (1, 2, 3, 4)
HD Mark (1, 2, 3, 4)
Characters (1, 2, 3, 4)
Trail Tone (Single, Multi)
Int Reject (Off, 1, 2, 3)
Pulselength (Short, Long)
Noise Reject (Off, On)
Trail Time
(15S, 30S, 1M, 3M, 6M, 15M, 30M, Cont)
Tune (Auto, Manu)
Disp Data (Off, Nav, ARP, All)
WPT Mark (Off, On)
EBL Ref (Rel, True)
VRM Unit (nm, km, sm)
Watchman (Off, 5M, 10M, 20M)
STBY DISP (Norm, Econo, Nav)
Guard Mode (In, Out)
Own Position (L/L, TD)
Cursor Posi (B/R, L/L)
Alm Sense LV (Low, Mid, High)
Dead Sector (Off, On)
Range
(1/8, 1/4, 1/2, 3/4, 1, 1.5,
2, 3, 4, 6, 8, 12, 16, 24,
Self Test
Installation Setup
1. Display
2. All Cancel
3. Vector ref
4. Vector Length
5. History
6. CPA SET
7. TCPA SET
8. AUTO ACQ
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Nav Talker (All, GPS, LC)
Depth Unit (m, fa, ft)
Temp Unit (¡C, ¡F)
Hdg Sensor (Magnet, Gyro)
Key Beep (Off, On)
Scan Stop (Rotate, Stop)
Dead Sector
Tune/Video Adjustment
Heading Alignment
Sweep Timing Adjustment
MBS Adjustment
Ant Height (Low, Mid, High)
STC Curve (Sharp, Std, Gntl)
Ope Mode (Master, Slave)
Hours in Use
TX Hours
MENU KEY
(Options)
: Defaut settings
36, 48) :1932 M2
36, 48, 64) :1942 M2