3-7
33. The next step is to set up external equipment. Press the NEXT soft key to show the
NAV SETUP menu.
POSITION SOURCE GP
SPEED SOURCE ETR
TEMPERATURE SOURCE ETR
DETPH SOURCE ETR
STW CALIBRATION +00%
TEMP CALIBRATION +00.0
q
F
DEPTH CALIBRATION +00ft
WIND AVERAGING 001 seconds(s)
WIND DIRECTION OFFSET S000.0
q
WIND SPEED CALIBRATION +00%
STW TEMP DEPTH
12.3 kt 56.3
q
F 99.5ft
WIND SPEED
1.2 kt
WIND DIR
131
q
Installation wizard, nav setup
34. Choose item and press the EDIT soft key.
35. Choose appropriate setting and then press the ENTER soft key. Refer to the table below
for description of each item.
NAV SETUP menu description
Item Description Settings (Default in bold)
Position
Source
Chooses source of position data.
FURUNO BB GPS: GPS Receiver
GP-310B/320B
GP: GPS navigator (via NETWORK
or NMEA port)
LC: Loran C navigator (via
NETWORK or NMEA port)
ALL: Multiple navaid connection (via
NETWORK or NMEA port)
Speed
Source
Chooses source of speed data
ETR (NavNet sounder), NMEA
Temperature
Source
Chooses source of water temperature
data.
ETR, NMEA. Select ETR to show
water temperature data fed from the
network sounder.
Depth
Source
Chooses source of depth data.
ETR, NMEA. Select ETR to show
depth data fed from the network
sounder.
STW
Calibration
Calibrates NMEA speed data. Enter amount
in percentage.
-50 to +50%, 00
Temp
Calibration
Calibrates NMEA temperature data. Enter
offset to correct NMEA temperature data.
-40.0°F to +40.0°F (or equivalent
in °F), 00.0°F
Depth
Calibration
Calibrates NMEA depth data. Enter offset to
correct NMEA depth data.
-15 to +90 ft (or equivalent in ft, fa
or P/B). 00 ft
Wind
Averaging
Enter a value to smooth wind speed/direction
data. Ship’s bow is referenced to smooth
wind vector movement.
001-600 s, 001 s
Wind
Direction
Offset
Offsets wind direction data.
S180°-P180°, S000.0°
Wind Speed
Calibration
Offsets NMEA wind speed data. Enter
amount in percentage.
-50 to +50%, 00%
To Next Page
Loading...
