Furuno 1945 - Radar Display Modes

1. DESCRIPTION OF OPERATION
1-7
1.7 Display Modes
This radar has the display modes shown below. All modes except head-up require a
heading signal. The true motion mode additionally requires position data.
Relative Motion (RM)
• [Head Up] (H UP)
• [Course Up] (C UP)
• [North Up] (N UP)
• [True View] (TRUE VIEW)
True Motion (TM)
• [True Motion] (TM)
1.7.1 How to select the display mode
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Display] and press the ENTER key.
Display menu
3. Use the Cursorpad (S or T) to select [Display Mode] and press the ENTER key.
Display Mode options
4. Use the Cursorpad (S or T) to select a display mode and press the ENTER key.
5. Press the MENU key to close the menu.
Note: All modes except head-up require a heading signal in AD-10 format or NMEA
format. If the heading signal is lost, the mode is changed to head-up and the north
marker disappears. The display for heading is XXX.X and the alarm sounds. The mes-
sage "GYRO" (AD-10 format data) or "NMEA_HDG" (NMEA format data) appears in