1. INSTALLATION AND WIRING
5
1.3 Required Tools and Materials
The following tools should be prepared in advance for this installation.
*: For cosmetic purposes, black color vinyl tape (cable color) is recommended.
No. Name Remarks
1 Electrical drill For making the mounting holes, drill bit: I 15 mm
2 Phillips-head screw driver #3, for securing the cable cover
3 Wrench For M8 (Hex. size 13 mm) and M12 (Hex. size 19 mm)
4 Hex. L-wrench For fastening the stud bolts (Hex. size 6 mm)
5 Self-vulcanizing tape For waterproofing the junction of connectors
6 Vinyl tape*
7 Cable tie For securing the cables
8 Ground wire IV-2sq
1
2
3
5
7
4
6
8
To Next Page
Loading...
