EasyManua.ls Logo

Furuno DRS6A-NXT - User Manual

Furuno DRS6A-NXT
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.furuno.com
A
ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
RADAR SENSOR
MODEL DRS6A-NXT/DRS12A-NXT
DRS25A-NXT
(Product Name: SOLID STATE DOPPLER RADAR)
SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION .......................................................................................... iii
INSTALLATION SPECIFICATIONS............................................................................... iv
FOREWORD.................................................................................................................... v
EQUIPMENT LISTS........................................................................................................ vi
1. INSTALLATION AND WIRING................................................................................... 1
1.1 Mounting Considerations ......................................................................................................1
1.2 Included Items.......................................................................................................................4
1.3 Required Tools and Materials...............................................................................................5
1.4 Fastening the Radiator to the Radiator Bracket....................................................................6
1.5 Mounting the Antenna Unit ...................................................................................................8
1.6 Wiring..................................................................................................................................11
2. INITIAL SETUP......................................................................................................... 15
2.1 Initial Setup for TZT9/TZT14/TZTBB ..................................................................................16
2.2 Initial Setup for TZTL12F/TZTL15F/TZT2BB/TZT12F/TZT16F/TZT19F.............................18
3. MAINTENANCE, TROUBLE SHOOTING ................................................................ 21
3.1 Maintenance .......................................................................................................................22
3.2 Troubleshooting ..................................................................................................................23
3.3 Replacement of Fuse..........................................................................................................23
3.4 Life of Parts.........................................................................................................................24
APPENDIX 1 RADIO REGULATORY INFORMATION ............................................AP-1
SPECIFICATIONS ..................................................................................................... SP-1
PACKING LISTS ......................................................................................................... A-1
OUTLINE DRAWINGS ................................................................................................ D-1
INTERCONNECTION DIAGRAM ................................................................................ S-1

Questions and Answers

  • E
    erik95Aug 8, 2025
    What to do if Furuno DRS6A-NXT Radar goes into standby after transmit?
    • D
      Deborah CobbAug 8, 2025
      If the Furuno Radar goes into standby soon after you set it to transmit and the "TX screen" appears momentarily, it's likely that overload protection has been activated. To fix this, turn off all equipment connected in the network, wait a few seconds, and then turn everything back on.
  • C
    Cynthia DoyleAug 12, 2025
    Why the multi function display cannot control Furuno DRS6A-NXT?
    • D
      Dr. Michael Miller MDAug 12, 2025
      If the multi function display cannot control the Furuno Radar, check that all cables are tightly fastened, the radar source setting is correct, the fuse of the cable assembly has not blown, and the power supply is compatible with the voltage rating of the antenna unit.
  • M
    mfreemanAug 16, 2025
    What to do if Furuno Radar picture is not updated or freezes?
    • M
      Margaret RoseAug 16, 2025
      If the Furuno Radar picture is not updating or freezes, check that all cables are tightly fastened and inspect the cables for any damage. If the picture has frozen, try rebooting the multi function display.
  • L
    lyonsjonathanAug 20, 2025
    What to do if marks and characters appear, but echoes do not appear on Furuno DRS6A-NXT Radar?
    • S
      scottjamesAug 20, 2025
      If marks and characters appear on the Furuno Radar but echoes do not, check that the antenna cable is tightly fastened and inspect all cables for any damage.
  • H
    huntlatoyaAug 25, 2025
    What to do if Furuno Radar picture does not change after changing the range?
    • A
      Anna MillsAug 25, 2025
      If you change the range on the Furuno Radar and the picture does not change, try changing the range again or reboot the multi function display.
  • F
    Frank BaldwinAug 29, 2025
    How to fix poor discrimination in range on Furuno Radar?
    • D
      Darryl HowardAug 29, 2025
      If you experience poor discrimination in range on the Furuno Radar, adjust the sea control.
  • C
    Christopher MorrowSep 2, 2025
    How to display range rings on Furuno DRS6A-NXT Radar?
    • J
      Jennifer ThompsonSep 2, 2025
      If range rings are not displayed on the Furuno Radar, check if the range rings are turned on in the menu.

Furuno DRS6A-NXT Specifications

General IconGeneral
TypeSolid-State Doppler Radar
Antenna Length6 ft
Target DetectionYes
Target AnalyzerYes
Fast Target TrackingYes
Bird ModeYes
Target TrackingYes
Doppler ProcessingYes
Weather ModeYes
IP RatingIP56
Range72 nm
Rotation Speed24 RPM

Related product manuals