1. RADAR OPERATION
1-84
1.44 ALERT Box
When an alert condition is found, the applicable alert message appears in the
ALERT box. A buzzer sounds for alarm and warning alerts. The ALERT box is
composed of four lines of information, as shown below.
Silence the buzzer with the [ALARM ACK] key or select the ALERT box then
push the left button. The buzzer and the flashing stop but the alert indication
remains on the display until the reason for the alert is removed.
Display Example 1: Alert and indication
Display Example 2: Alert only
Display Example 3: Indication only
Alert Box Configuration
(lines inside box not present in actual box)
- - - - - SYSTEM ERROR - - - - -
VIDEO
FORMAT CARD DATA
- - - - AIS ALARM MESSAGE - - - -
AIS: no valid ROT info
RD CARD DATA
Line 1: Name of alert source
Line 2: Name of alert
Line 3: Name of indication
Line 4: Name of indication
To Next Page
Loading...
