www.furuno.co.jp
All brand and product names are trademarks, registered trademarks or
service marks of their respective holders.
MARINE RADAR/ARPA
FAR-2117/2127/2817/2827
FAR-2117-BB/2127-BB
Installation Manual
Comply with MSC.192(79)
TABLE OF CONTENTS
SAFETY IINSTRUCTIONS ..................... i
EQUIPMENT LISTS...............................iii
SYSTEM CONFIGURATION .................vi
1. MOUNTING.....................................1-1
1.1 Antenna Unit.................................1-1
1.2 Monitor Unit..................................1-6
1.3 Control Unit ................................1-10
1.4 Processor Unit............................1-15
2. WIRING........................................2-1
2.1 Interconnection.............................2-1
2.2 Antenna Unit.................................2-2
2.3 Monitor Unit..................................2-6
2.4 Processor Unit..............................2-7
2.5 Changing AC Power Specification of
Processor Unit ..........................2-12
3. SETTING AND ADJUSTMENT ....3-1
3.1 DIP Switch Setting .......................3-1
3.2 Initializing Tuning..........................3-2
3.3 Heading Alignment.......................3-3
3.4 Adjustment Sweep Timing............3-6
3.5
Suppressing Main Bang
...................3-7
3.6 Other Settings ..............................3-8
3.7 Dual Radar Display
(non IMO-type only) ..................3-16
4. INSTALLING OPTIONAL
EQUIPMENT................................ 4-1
4.1 Gyro Converter GC-10.................4-1
4.2
Memory Card Interface Unit
..............4-9
4.3 DVI-RGB Conversion Kit
(for VDR connection) ..................4-12
4.4 Performance Monitor PM-31......4-15
4.5 BNC Connector Converter .........4-17
4.6 Junction Box...............................4-18
5. INPUT/OUTPUT DATA ................ 5-1
INSTALLATION MATERIALS,
ACCESSORIES,SPARE PARTS........A-1
OUTLINE DRAWINGS ......................D-1
INTERCONNECTION DIAGRAMS ...S-1
To Next Page
