4. AIS OPERATION
4-19
When the association criteria (gap, range, bearing, speed, and course) is met, and the
ASSOCIATION TARGET setting is [AIS], the TT symbol is erased and only the AIS
symbol is displayed.
All default association settings are restored whenever the power is turned on.
To show the association information, place the cursor on the target data box at the
right side of the screen, then press the ACQ key. The selected target’s AIS and TT
data are displayed together as shown in the examples below.
4.16 How to View Own Ship Data
Own ship’s static data (type of ship, call sign, etc.) can be viewed as follows:
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 AIS].
4. Select [7 OWN SHIP DATA]. The [OWN SHIP DATA] menu appears.
The data display shows the following information.
5. Close the menu.
Ship name Ship call-sign
Ship coordinates COG
SOG Heading
ROT Positioning sensor and sensor quality
MMSI IMO Number
Ship’s dimensions Ship’s draught
Location of external EPFS antenna AIS software version
Ship and cargo type Own ship type and cargo type on-board
Combined TT/AIS data
for a CLASS A vessel
Combined TT/AIS data
for a CLASS B vessel
To Next Page
Loading...
