4. AIS OPERATION
4-27
How to filter the message list
When you want to filter the message list, use the filter setting on the top of the
message list.
• Upper filter setting:
• [ALL]: Show all received messages.
• [TARGET]: Show only the AIS message from the AIS-equipped ships, SAR
aircrafts and AIS base stations.
• [SART]: Show only the AIS message from the SART.
• [ATON]: Show only the AIS message from the AtoN.
• Lower filter setting:
• [ALL]: Show all received messages.
• [ADDRESSED]: Show only the addressed messages.
• [BROADCAST]: Show only the broadcast messages.
• [PROTECTED]: Show only the protected messages.
• [UNREAD]: Show only the unread messages.
5. Select the message to be displayed, then left-click.
The message details are displayed.
6. Close the menu.
Received date
Message type
MMSI number
Ship’s call sign
Ship’s name
Message content
Select [ON] to protect the
message.
Select [ON] to delete the message.
This menu is activated when
[PROTECTED] is set to [OFF].
To Next Page
Loading...
